Configuration Changes Requiring Server Restart; Core Server Configuration Attributes Reference - Red Hat DIRECTORY SERVER 7.1 Configuration

Configuration Changes Requiring Server Restart

Some configuration attributes cannot be altered dynamically while the server is
running. In these cases, for the changes to take effect, the server needs to be shut
down and restarted. The modifications should be made either through the
Directory Server Console or by manually editing the
"Configuration Quick Reference Tables" at the end of this chapter contains a list of
these attributes.

Core Server Configuration Attributes Reference

This section contains reference information on the configuration attributes that are
relevant to the core server functionality. For information on changing server
configuration, see "Accessing and Modifying Server Configuration," on page 32.
For a list of server features that are implemented as plug-ins, see section "Server
Plug-in Functionality Reference," on page 130. For implementing your own server
functionality, contact Red Hat Professional Services.
The configuration information stored in the
information tree under the general configuration entry
Figure 2-2.
Figure 2-2 Directory Information Tree Showing Configuration Data
The list of configuration tree nodes covered in this section are as follows:
•
cn=config
Core Server Configuration Attributes Reference
file. Table 2-6 under
dse.ldif
file is organized as an
dse.ldif
cn=config,
Chapter 2 Core Server Configuration Reference
as shown in
35