Nsslapd-Errorlog-Logrotationsyncmin (Error Log Rotation Sync Minute); Nsslapd-Errorlog-Logrotationtime (Error Log Rotation Time) - Red Hat DIRECTORY SERVER 7.1 Configuration

Core Server Configuration Attributes Reference
Default Value:
Syntax:
Example:

nsslapd-errorlog-logrotationsyncmin (Error Log Rotation Sync Minute)

Specifies the minute of the day for rotating error logs. This attribute must be used
in conjunction with
nsslapd-errorlog-logrotationsynchour
Entry DN:
Valid Range:
Default Value:
Syntax:
Example:

nsslapd-errorlog-logrotationtime (Error Log Rotation Time)

Specifies the time between error log file rotations. The error log will be rotated
when this time interval is up, regardless of the current size of the error log. This
attribute supplies only the number of units. The units (day, week, month, and so
forth) are given by the
Rotation Time Unit) attribute.
Although it is not recommended for performance reasons to specify no log
rotation, as the log will grow indefinitely, you have two ways of specifying this.
Either you set the
nsslapd-errorlog-logrotationtime
nsslapd-errorlog-maxlogsperdir
larger than
attribute. See "nsslapd-errorlog-maxlogsperdir (Maximum Number of Error Log
Files)," on page 64, for more information.
Entry DN:
Valid Range:
62 Red Hat Directory Server Configuration, Command, and File Reference • May 2005
0
Integer
nsslapd-errorlog-logrotationsynchour: 23
nsslapd-errorlog-logrotationsync-enabled
cn=config
0 through 59
0
Integer
nsslapd-errorlog-logrotationsyncmin: 30
nsslapd-errorlog-logrotationtimeunit
nsslapd-errorlog-maxlogsperdir
, the server then checks the
1
cn=config
-1 | 1 to the maximum 32 bit integer value (2147483647), where a
value of -1 means that the time between error log file rotation is
unlimited).
attributes.
attribute value to
attribute to . The server checks the
-1
attribute first, and, if this attribute value is
nsslapd-errorlog-logrotationtime
and
(Error Log
or the
1