Nsds5Replicaport; Nsds5Replicareapactive; Nsds5Replicarefresh - Red Hat DIRECTORY SERVER 7.1 Configuration

Core Server Configuration Attributes Reference
Syntax:
Example:

nsDS5ReplicaPort

Specifies the port number for the remote server containing the replica. Once this
attribute has been set, it cannot be modified.
Entry DN:
Valid Values:
Default Value:
Syntax:
Example:

nsDS5ReplicaReapActive

This read-only attribute specifies whether the background task that removes old
tombstones (deleted entries) from the database is active. A value of zero (
indicates that the task is inactive, and a value of
If you try to set the value, the server will ignore the modify request.
Entry DN:
Valid Values:
Default Value:
Syntax:
Example:

nsDS5ReplicaRefresh

Allows you to initialize your replica. This attribute is absent by default. However,
if you add this attribute with a value of
replica and remove the attribute value.
110 Red Hat Directory Server Configuration, Command, and File Reference • May 2005
DirectoryString
nsDS5ReplicaLastUpdateStatus: 0 replica acquired
successfully
cn=ReplicationAgreementName,cn=replica,cn="suffixName",cn=
mapping tree,cn=config
Port number for the remote server containing the replica
N/A
Integer
nsDS5ReplicaPort: 389
cn=ReplicationAgreementName,cn=replica,cn="suffixName",cn=
mapping tree,cn=config
0 | 1
N/A
Integer
nsDS5ReplicaReapActive: 0
indicates that the task is active.
1
, then the server will initialize the
start
)
0