Nsslapd-Auditlog-Logmaxdiskspace (Audit Log Maximum Disk Space); Nsslapd-Auditlog-Logminfreediskspace (Audit Log Minimum Free Disk Space) - Red Hat DIRECTORY SERVER 7.1 Configuration

Attributes in dse.ldif
nsslapd-auditlog-logging-enabled
nsslapd-auditlog
nsslapd-auditlog-logging-enabled
nsslapd-auditlog

nsslapd-auditlog-logmaxdiskspace (Audit Log Maximum Disk Space)

Specifies the maximum amount of disk space in megabytes that the audit logs are
allowed to consume. If this value is exceeded, the oldest audit log is deleted.
When setting a maximum disk space, consider the total number of log files that can
be created due to log file rotation. Also remember that there are three different log
files (access log, audit log, and error log) maintained by the Directory Server, each
of which will consume disk space. Compare these considerations with the total
amount of disk space that you want to be used by the audit log.
Entry DN:
Valid Range:
Default Value:
Syntax:
Example:
nsslapd-auditlog-logminfreediskspace (Audit Log Minimum Free Disk
Space)
Specifies the minimum permissible free disk space in megabytes. When the
amount of free disk space falls below the value specified on this attribute, the
oldest audit log is deleted until enough disk space is freed to satisfy this attribute.
Entry DN:
Valid Range:
Default Value:
Value
off
empty string
off
filename
cn=config
-1 | 1 to the maximum 32 bit integer value (2147483647), where a
value of -1 means that the disk space allowed to the audit log is
unlimited in size.
500
Integer
nsslapd-auditlog-logmaxdiskspace: 500
cn=config
1 to the maximum 32 bit integer value (2147483647)
5
Core Server Configuration Attributes Reference
Logging enabled or disabled
Disabled
Disabled
Chapter 2 Core Server Configuration Reference 49