Chapter 6 Migration From Earlier Versions; Migrated Configuration Attributes; General Server Configuration Attributes - Red Hat DIRECTORY SERVER 7.1 Configuration

This chapter is intended to provide a reference of the information migrated by the
migrateInstance7
7.x Directory Server. Migration from versions 6.2 and later are supported in
Directory Server 7.1.
For information on how to run the
Directory Server Installation Guide.

Migrated Configuration Attributes

This section explains which configuration attributes are automatically migrated by
the
migrateInstance7
automatically migrated are either configured during the installation process for the
new Directory Server or need to be configured manually for security reasons after
the initial setup.

General Server Configuration Attributes

Table 6-1 lists the configuration attributes stored in the
automatically migrated when you run the
Table 6-2 lists the configuration attributes stored in the
not automatically migrated when you run the
that are not automatically migrated are either configured during the installation
process for the new Directory Server or need to be configured manually. The
reason for not migrating an attribute is stated in the table.
Migration from Earlier Versions
script in the case of migration from a 6.x Directory Server to a
migrateInstance7
script and which ones are not. Attributes which are not
Migrated Configuration Attributes
script, refer to the Red Hat
cn=config
script.
migrateInstance7
cn=config
migrateInstance7
Chapter 6 Migration from Earlier Versions
Chapter 6
entry that are
entry that are
script. Attributes
225