Generating And Transferring System Files - AMX VISUALARCHITECT 1.1 Manual

Use the Select All and Deselect All buttons to select/deselect all diagrams in the list.
3. Specify the Margins for the printout: Enter the space you want to allocate as margins on the printed
page (in inches) in these fields.
The default margin settings are: Left = 0.5", Right = 0.5", Top = 0.25", Bottom = 0.25".
4. Specify a Header / Footer for the printouts:
5. Make additional print options as desired:

Generating And Transferring System Files

Once your VA project is complete, you are ready to generate and transfer the system files required by the
Central Controller to make the system work.
The FileTransfer 2 application (available for free download from www.amx.com) is
required to perform transfers.
1. Select System > Generate and Transfer System Files (or click the toolbar button) to access the
Generate & Transfer System Files dialog.
2. Select an Action option:
3. Select a Generate option:
VisualArchitect v1.1
CONFIDENTIAL AND PROPRIETARY. COPYRIGHT, AMX LLC, 2006
Use $SYSTEM$ to insert the system name
Use $DIAGRAM$ to insert the diagram name
Use $DEALER$ to insert the dealer name
Use $DESIGNER$ to insert the designer name
Use $REVISION$ to insert the revision name or number
Use $DATE$ to insert the current date
Use common scaling factor - This option resizes all print images to the same scale to fit the
page (default = enabled).
Print grid - Check this option to include the diagram grid in the printout(s).
Print background color - Check this option to include the background color in the
printout(s). By default, this option is disabled - diagrams are printed with a white background.
Print as grayscale - Check to print the diagram(s) in grayscale.
Generate and transfer all required system files at once via the Generate and Transfer System
Files option.
Generate all system files, without initiating the transfer process via the Generate System Files
option.
Transfer system files that have already been generated via the Transfer Previously Generated
System Files option.
Click the Browse button next to the Output Folder field to locate and select a target directory
for the generated files (in the Browse For Folder dialog).
Select Create Project Subfolder to create a new subfolder within the specified Output Folder
for this project (default = enabled).
Finishing the Project
135