Workspace Navigator Window - AMX TPDESIGN4 V2.5 Instruction Manual

TPDesign4 Program Overview

Workspace Navigator Window

The Workspace Navigator (FIG. 4) is typically located on the left side of the screen (although you
may move it anywhere you like) and is used to open the pages / popup pages in the file, and to view/
edit the function codes associated with each page.
The Workspace Navigator contains two tabs:
FIG. 4 Workspace Navigator Window
8
Popup Page that you want to display on the page. Once the Popup is displayed on the
page, you can click and drag to resize and position it manually.
Use the View > MDI Page Tabs option to toggle the page tabs. When this option is
enabled, a tab is displayed for each open page. The page tabs normally appear along the
bottom edge of the Design View window area, but can be moved, toggled or modified via
the MDI tabs context menu (right-click inside any of the tabs). TPDesign4 will display
up to a maximum of 10 page tabs. If you open more than 10 pages, the tabs automatically
disappear.
Right mouse click anywhere within a Design View window to open the Design View
context menu. This context menu contains shortcuts to many key design tools.
Select Display from the Design View context menu to access the Display sub-menu,
containing options that allow you to select which state of a selected button to display in
the Design View.
Select Layout from the Design View context menu to access the Layout sub-menu,
containing options for layout/design control (send to front/back, align, center, etc). This
menu is identical to the Layout menu, accessible from the main menu bar.
Pages
Function Maps
Pages tab
Function Maps tab
TPDesign4 Touch Panel Design Program