Table of Contents
Advertisement
Quick Links
H3C SecPath L1000[L5000][M9000-AD10]
Application Delivery Security Gateway Series
Installation Guide
Copyright © 2025 New H3C Technologies Co., Ltd. All rights reserved..
No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of New
H3C Technologies Co., Ltd.
Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this document are
the property of their respective owners.
The information in this document is subject to change without notice.
i
Advertisement
Table of Contents
Related Manuals for H3C SecPath L5000 Series
Summarization of Contents
Preparing for Installation
Safety Recommendations
Guidelines to avoid bodily injury or device damage during installation.
Electrical Safety
Precautions for safe operation around electrical hazards in the work area.
Laser Safety
Warnings and procedures related to invisible laser light from optical ports.
Handling Safety
Guidelines for safely moving, unpacking, and handling the device.
Installation Site Requirements
Requirements for the installation site, including weight support and environment.
Temperature and Humidity Control
Maintaining optimal temperature and humidity for correct operation and service life.
Cleanliness and Dust Control
Importance of a dust-free environment to prevent communication failures.
ESD Prevention
Measures to prevent electrostatic discharge damage to the device.
EMI (Electromagnetic Interference) Prevention
Guidelines to prevent adverse effects from electromagnetic interference.
Lightning Protection
Procedures to protect the device from lightning strikes.
Power Supply Verification
Verifying power system requirements meet device specifications.
Installation Tools
List of necessary tools for device installation.
Installation Accessories
Required accessories for device installation, varying by model.
Pre-installation Checklist
Checklist of requirements before starting device installation.
Installing the Device
Installation Flow
Step-by-step overview of the device installation process.
Mounting the Device on a Workbench
Instructions for placing and securing the device on a workbench.
Mounting a 1U Device in a Standard 19-inch Rack
Procedures for installing a 1U device into a standard 19-inch rack.
Rack-Mounting the Device with Brackets
Using front and rear mounting brackets for rack installation.
Mounting a 2U Device in a Standard 19-inch Rack
Procedures for installing a 2U device into a standard 19-inch rack.
Rack-Mounting the Device with Slide Rails
Installing the device in a rack using chassis rails and slide rails.
Grounding a 1U Device
Connecting the grounding cable for a 1U device for protection.
Grounding a 2U Device
Connecting the grounding cable for a 2U device for protection.
Installing a Power Supply
Step-by-step guide for installing power supply units.
Installing a Fan Tray
Procedures for installing fan trays for device cooling.
Installing an Interface Module
Installing interface modules for network connectivity.
Installing a High-Density Interface Module
Procedures for installing high-density interface modules.
Installing a Drive
General procedures for installing storage drives.
Installing an M.2 Drive
Specific steps for installing an M.2 storage drive.
Installing a SATA Drive
Specific steps for installing a SATA storage drive.
Installing a USB Drive
Instructions for installing and using USB drives.
Connecting Ethernet Cables
Guidance on connecting network cables.
Connecting an Ethernet Copper Port
Instructions for connecting Ethernet cables via copper ports.
Connecting an Ethernet Fiber Port
Instructions for connecting Ethernet cables via fiber ports.
Connecting Power Cords
Procedures for connecting power cords to the device.
Connecting an AC Power Cord
Steps for connecting AC power cords.
Connecting a DC Power Cord
Steps for connecting DC power cords.
Connecting an HVDC Power Cord
Information on connecting HVDC power cords.
Verifying the Installation
Checks to perform after completing the installation.
Logging in to the Device
Powering on the Device
Steps for powering on the device and initial checks.
Login Methods Overview
Overview of supported methods for logging into the device.
Logging in from the Web Interface
Procedure for accessing the device via its web interface.
Logging in from the Console Port
Connecting and logging in using a console cable.
Connecting a DB9-to-RJ45 Console Cable
Detailed steps for connecting a DB9-to-RJ45 console cable.
Connecting a USB-to-RJ45 Console Cable
Steps for installing drivers and connecting via USB-to-RJ45 cable.
Setting Terminal Parameters
Configuring terminal emulator settings for console access.
Logging in from the Micro USB Console Port
Connecting and logging in using a micro USB console cable.
Logging in through Telnet
Procedures for enabling and using Telnet for remote login.
Hardware Replacement
Replacing a Power Supply
Procedures for removing and installing power supply units.
Replacing an Interface Module
Procedures for removing and installing interface modules.
Replacing a High-Density Interface Module
Procedures for replacing high-density interface modules.
Replacing a Fan Tray
Procedures for removing and installing fan trays.
Replacing a Drive
General procedures for replacing storage drives.
Replacing an M.2 Drive
Specific steps for replacing M.2 drives.
Replacing a SATA Drive
Specific steps for replacing SATA drives.
Replacing a Transceiver Module
Procedures for removing and installing transceiver modules.
Hardware Management and Maintenance
Displaying Detailed Device Information
Displaying comprehensive hardware and status information of the device.
Displaying Software and Hardware Version Information
Showing current software and hardware version details.
Displaying Electrical Label Information
Displaying electrical label information such as serial number and MAC address.
Displaying CPU Usage
Monitoring the device's CPU utilization over different time intervals.
Displaying Power Supply Status
Checking the operational status of the device's power supplies.
Displaying Memory Usage
Monitoring the device's memory utilization statistics.
Displaying Temperature Information
Displaying temperature readings from various sensors within the device.
Displaying Operational Statistics
Displaying or saving operational statistics of functional modules.
Displaying Transceiver Module Information
Viewing key parameters of transceiver modules in specific interfaces.
Rebooting the Device
Procedures for rebooting the device immediately or on a schedule.
Troubleshooting
Power Supply Failure
Diagnosing and resolving issues related to power supply failure.
Configuration Terminal Display Issue
Resolving issues with garbled or blank text on the configuration terminal.
Cooling System Failure
Diagnosing and resolving issues related to high device temperatures.
Software Loading Failure
Resolving issues where software fails to load correctly.
Cables
Console Cable
Information on console cables and their connectors.
Ethernet Twisted Pair Cable
Details on Ethernet twisted pair cables and their specifications.
Making an Ethernet Twisted Pair Cable
Step-by-step guide to creating an Ethernet twisted pair cable.
Optical Fiber
Characteristics and types of optical fibers used.
Need help?
Do you have a question about the SecPath L5000 Series and is the answer not in the manual?
Questions and answers