Related Manuals for Devine Sound Scout 15A
Summary of Contents for Devine Sound Scout 15A
- Page 1 The information included in this user manual is subject to change at any time and without notification: Version: 1.0 Date & author initials: 01-08-2022 RV Version: 1.1 Revision date & author initials: 16-11-2022 SM...
- Page 2 Important: Due to the technical specifications of the built-in battery, it’s recommended to charge the Devine Sound Scout before using the unit for the first time. To charge the built-in battery, simply plug the power cable into the power port and connect the device to mains power.
-
Page 3: Safety Instructions
Safety Instructions WARNING! Keep this device away from moisture, water and rain to prevent any danger of electric shocks! Every person involved with the installation, operation and maintenance of this device must: - Be qualified. - Be skilled. - Have read the instructions included in this user manual. - Be sure that neither the device nor the included accessories are damaged. - Page 4 - If the device is not operated in the manner described in this user manual, damages or even injuries could occur. Devine can not be held responsible for any injuries or damages that occur as a result of improper use of this product.
- Page 5 Symbol Explanation Devine cannot be held liable for any damage or personal injury caused by misuse. The information included in this user manual is subject to change at any time and without notification: Version: 1.0 Date & author initials: 01-08-2022 RV Version: 1.1...
- Page 6 The Bluetooth® image, brand and logo are all registered trademarks and the property of Bluetooth SIG Inc. Any use of such images, brands and logos by DEVINE is under licence. Other trademarks and trade names are the property of their respective owners.
- Page 7 Legal Use of Wireless Systems The Devine Sound Scout system offers wireless use in combination with the Devine Sound Scout Mic A, the Devine Sound Scout Mic B and/or the Devine Sound Scout Bodypack. Please note that the permitted use of wireless systems differs per country. As such, it’s important to make sure that you’re legally allowed to use any wireless system beforehand, either by contacting an expert or the...
-
Page 8: Overview Of The Device
Overview of the Device The information included in this user manual is subject to change at any time and without notification: Version: 1.0 Date & author initials: 01-08-2022 RV Version: 1.1 Revision date & author initials: 16-11-2022 SM... - Page 9 Warning Before Use Devine Sound Scout speakers are able to produce volume levels that over a short or long period of time can cause temporary or permanent hearing damage. Always use this device with care and set a limited volume level whenever possible.
- Page 10 Mic Level (UHF) The optional wireless microphones (Devine Sound Scout Mic A, Mic B or Bodypack) can be connected to the speaker to amplify speech or vocals: - Turn the volume of the UHF section down.
- Page 11 Master Level This control determines the master volume of the speaker. Below it, two indicator LEDs have been fitted. The green LED indicates that the device is switched on, while the red LED is a clipping indicator. If the clipping indicator lights up, the master volume will need to be turned down until the red light turns off.
- Page 12 Continuously overloading the built-in amplifier while the red LED burns can significantly shorten the lifespan of the internal speaker components as well as the built-in amplifier and may even cause irreparable damage. Bear in mind that any damage caused by misuse is not covered by the warranty. General Tips for Microphone Use For optimum sound quality, the microphone needs to be held close to the mouth and at no more than five centimetres from the lips.
-
Page 13: Troubleshooting
Troubleshooting If you happen to encounter any problems while using your Sound Scout speaker, we recommend checking this troubleshooting section to see if a solution can be found. If none of the suggested solutions included below solve your particular problem, please contact your local retailer for further advice. This troubleshooting section includes all of the most common possible issues and is not a complete list of every possible fault, defect, and their subsequent solution. - Page 14 Problem Possible Cause Solution The Treble and/or Bass tone Return the tone controls to the settings are set to extreme values neutral position and see if the distortion disappears. Woofer or tweeter defect If fed an overdriven input signal for too long, the speaker will develop permanent damage.
-
Page 15: Features And Specifications
– Power supply: 230 V AC, 50 Hz or a compatible 12V DC external power supply – Fuse: T10A 250V for 12V operation, T2A 250V for 230 V operation – Amplifier power: 45 W RMS (90 W peak) – 5-band graphic EQ Specification Sound Scout 12A Sound Scout 15A Woofer 12” woofer 15” woofer Tweeter 1”... - Page 17 EU Declaration of Conformity Devine pro audio and studio products Verrijn Stuartweg 18 4462 GE Goes The Netherlands This declaration of conformity is issued under the full responsibility of the manufacturer. Product code: Product name: Devine Sound Scout 12A Active 12-inch loudspeaker with Bluetooth (2.4 GHz) and handheld microphones (830 MHz/864 MHz).
- Page 18 UK Declaration of Conformity Devine pro audio and studio products Verrijn Stuartweg 18 4462 GE Goes The Netherlands This declaration of conformity is issued under the full responsibility of the manufacturer. Product code: Product name: Devine Sound Scout 12A Active 12-inch loudspeaker with Bluetooth (2.4 GHz) and handheld microphones (830 MHz/864 MHz).
Need help?
Do you have a question about the Sound Scout 15A and is the answer not in the manual?
Questions and answers