Page 1
Artis MKII series Passive speaker User manual The information in this user manual is subject to change at any time without notice. Version: Date of creation and author's initials:18-07-2018 RV Revision date and author's initials: -...
Page 2
Introduction Thank you for purchasing this Devine Artis MKII passive speaker. We advise that you read this user manual in its entirety before unpacking the contents of the box, so that you are familiar with all of the functionality that this product has to offer. Please be sure to check that all of the parts and accessories listed below under 'box contents' are included in the package.
Safety instructions WARNING! Keep this device away from moisture, water and rain to avoid the chance of electric shocks. Everyone involved with the installation, operation and maintenance of this device must: - Be qualified - Be skilled - Have read the instructions in this user manual - Be sure that neither the device nor the included accessories are damaged.
Page 4
- Should the device not be used in the manner described in this user manual, damages or even injuries could occur. Devine cannot be held responsible for any injuries or damages that occur as a result of improper use of this product.
Page 5
Guidelines and operation of this device The connection panels on the Artis 10 MKII, 12 MKII and 15 MKII are almost identical. 1. lockable speaker input speaker connector 2. lockable speaker output speaker connector The following information applies to these connectors: - The speakers have an impedance of 8 ohms.
Use these units with care and keep the volume at a reasonable level when possible. The volume should ideally be set to a comfortable level when listening to music. Devine cannot be held liable for any injuries or damage resulting from the use of this product. General use Housing The Artis MKII speaker has a robust housing made of moulded plastic.
Using together with a subwoofer When you want to use the Devine Artis MKII speakers in combination with a separately available subwoofer, it's best to choose one that's a size bigger than your speaker which will help to ensure an optimal sound.
Page 8
Note that in that case the amplifier power will be divided over both speakers. This will not result in more volume therefore, but the sound will be better dispersed. This can be practical in applications where a wider sound dispersion is desirable. To connect a passive Artis MKII to an active Artis MKII speaker, a speaker cable is required that has a lockable speaker connection on both sides.
Page 9
Speaker troubleshooting guide If you have a problem with your speaker, please consult this troubleshooting section for possible solutions. If, after consulting this section, the problem remains unresolved, please contact your dealer for more information and/or help. This troubleshooting section contains information on how to solve the most common speaker problems, but it does not and cannot cover every eventuality.
Specifications General specifications for all models: – lightweight speaker cabinet with plastic housing – 10, 12 or 15-inch passive speaker with woofer and compression driver + horn – metal grille – practical handles – acoustic foam behind grille to prevent any unwanted matter from getting inside the speaker –...
Need help?
Do you have a question about the Artis MKII Series and is the answer not in the manual?
Questions and answers