Advertisement

Quick Links

Important!
This user's manual is a main operating document intended
for technical, maintenance, and operating staff.
The manual contains information about purpose, technical
details, operating principle, design, and installation of the
Bodo unit and all its modifications.
Read the user's manual carefully
before proceeding with installation
works. Compliance with the manual
requirements ensures reliable
operation and long service life of the
unit. Keep the user's manual available
as long as you use the unit. You may
need to reread the information on
the product servicing.
This unit is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the unit by a person
responsible for their safety.
Children should be supervised to ensure that they
do not play with the unit.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in a
61
Technical and maintenance staff must have theoretical
and practical training in the field of ventilation systems
and should be able to work in accordance with workplace
safety rules as well as construction norms and standards
applicable in the territory of the country.
safe way and understand the hazards involved.
Cleaning and user maintenance shall not be made
by children without supervision.
Children shall not play with the appliance.
Precautions must be taken to avoid the back-flow
of gases into the room from the open flue of gas or
other fuel-burning appliances.
The appliance may adversely affect the safe
operation of appliances burning gas or other fuels
(including those in other rooms) due to back flow
of combustion gases. These gases can potentially
result in carbon monoxide poisoning. After
installation of the unit the operation of flued gas
appliances should be tested by a competent person
to ensure that back flow of combustion gases does
not occur.
Connection to the mains must be made through a
disconnecting device, which is integrated into the
fixed wiring system in accordance with the wiring
rules for design of electrical units, and has a contact
separation in all poles that allows for full discon-
nection under overvoltage category III conditions.
Ensure that the unit is switched off from the supply

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bodo Supreme and is the answer not in the manual?

Questions and answers

Summarization of Contents

Fan Control Modes
Main Operating Modes
Details the fan's operating modes based on sensor triggers and default settings.
Preset Sensor Triggering Parameters
Explains how humidity, temperature, motion, and light sensors trigger the fan's operation.
Fan Operating Modes
24 Hours Mode
Fan runs continuously at selected speed; switches to sensor-triggered speed when activated.
Interval Ventilation Mode
Fan operates for 30 mins every 12 hours if no sensor is activated.
Boost Mode
Fan runs at maximum speed for the duration of the turn-off delay timer.
Do Not Disturb Function
Allows setting a time interval where the fan ignores sensors.
Sensors and Their Functions
Humidity Sensor
Built-in sensor with manual/auto modes to adjust fan speed based on humidity levels.
Motion Sensor
Detects movement and switches fan speed, activating a turn-off delay timer.
Light Sensor
Reacts to sudden light changes, activating a 30s turn-on delay timer for speed adjustment.
Air Quality Sensor
Manual/auto modes for adjusting fan speed based on air quality index.
Timers
Details turn-off delay timer (configurable) and turn-on delay timer (fixed 30s).
Installation Guide
Fan Installation Sequence
Step-by-step guide for installing the fan, including power cable routing and mounting.
12 V DC Connection
Wiring instructions and warnings for the 12 V DC power supply connection.
Technical Maintenance
Maintenance Steps
Steps for cleaning the fan, including power disconnection and panel removal.

Table of Contents