Advertisement
External device connection manual for TOP Design Studio
YOKOGAWA Electric Corporation
Supported version
TOP Design Studio
CONTENTS
We want to thank our customers who use the Touch Operation Panel.
1.
Describes the devices required for connection, the setting of
each device, cables, and configurable systems.
2.
Select a TOP model and an external device.
3.
Describes how to set the TOP communication.
4.
Describes how to set up communication for external devices.
5.
Describes the cable specifications required for connection.
6.
Refer to this section to check the addresses which can
communicate with an external device.
UT/UP/UM Series
PC Link Driver
V1.4.3.0 or higher
Page 2
Page 3
Page 4
Page 9
Page 11
Page 14
1 / 14
Advertisement
Table of Contents
Related Manuals for YOKOGAWA US 1000
Summarization of Contents
TOP Communication Setting
Communication Setting in TOP Design Studio
Configures communication interface and options within TOP Design Studio software.
Communication Setting in TOP
Sets communication parameters directly on the TOP unit via its control panel interface.
External Device Setting
External Device Setting 1 (Temperature Controllers UT100 Series, Digital Indication Controllers)
Details setting up communication parameters for specific controller series via front panel keys.
External Device Setting 1 (UT2000 Series)
Explains how to configure communication for UT2000 series using dip switches on the controller.
Cable Table
Cable Table 1 (Temperature Controllers)
Provides wiring diagrams and pin assignments for RS-485 1:1 and 1:N connections for Temperature Controllers.
Cable Table 2 (Digital Indicating Controllers)
Details cable connections and pinouts for RS-485 1:1 and 1:N setups for Digital Indicating Controllers.
Cable Table 3 (UT2000 Series)
Shows cable diagrams and pin arrangements for RS-422 1:1 and 1:N connections for UT2000 Series.
Need help?
Do you have a question about the US 1000 and is the answer not in the manual?
Questions and answers