Load Fail-Safe Defaults - TYAN TOMCAT I915 User Manual

Tomcat i915 S5120
DRAM Voltage Regulator
This option controls how much voltage is supplied to your DRAM, with a maximum allowable
voltage adding of 200mV. Select Default if you are not sure.
•
Default
•
+50mV
•
+100mV
•
+150mV
•
+200mV
1.5v Voltage Regulator
This option allows you to define the chipset core voltage. Always leave this option set to
default settings.
VTT Voltage Regulator
This option controls how much voltage is supplied as the VTT (+1.5) GTL Termination Voltage
to the on-board regulator, with a maximum allowable voltage adding of 150mV. Select Default
if you are not sure.
•
Default
•
+50mV
•
+100mV
•
+150mV

3.9 Load Fail-Safe Defaults

When you press <Enter> on this item you get a confirmation dialog box with a message similar
to:
Pressing 'Y' loads the BIOS default values for the most stable, minimal-performance system
operations.
Load Fail-Safe Defaults (Y/N)? N
3-32
http://www.tyan.com
Chapter 3: BIOS Setup