TYAN TOMCAT I915 User Manual page 36

Tomcat i915 S5120
The removable boot device priority is as follows.
o
o
o
o
o
o
o
Hard Disk Boot Priority
This setting controls the order that the BIOS uses to look for a hard disk from which to load the
operating system during the boot process. The hard disk boot sequence options are as follows.
The hard disk boot device priority is as follows.
First, Second, and Third Boot Devices
These indicate the boot priority. For example if the First Boot Device is set as Removable, the
Second Boot Device as CDROM, and the Third Boot Device as Hard Disk, then the system
will try to boot from a removable drive, failing which it will try to boot from a CDROM, and if this
also fails, it will try to boot from the Hard Disk.
Boot Other Device
This option allows the system to boot from any other bootable device.
•
Enabled
•
Disabled
Swap Floppy Drive
This will swap your physical drive letters A & B if you are using two floppy disks.
•
Enabled
•
Disabled
Internal Floppy Disks
LS120 Disk
Internal Zip Disk
st
1 USB Floppy Disk
nd
2 USB Floppy Disk
st
1 USB ZIP Disk
nd
2 USB ZIP Disk
1. Primary Master
2. Primary Slave
3. Secondary Master
4. Secondary Slave
st
5. 1 USB Hard Disk
nd
6. 2 USB Hard Disk
rd
7. 3 USB Hard Disk
8. Other Bootable Add-in Cards
http://www.tyan.com
3-9
Chapter 3: BIOS Setup