Related Manuals for unicraft WPP 50 E
Summarization of Contents
1 Introduction
1.1 Copyright
Describes copyright protection for the operating instructions.
1.2 Customer service
Provides contact information for customer service and technical support.
1.3 Limitation of liability
Outlines the manufacturer's liability limitations for product use.
2 Safety
2.1 Legend of symbols
Explains the meaning of safety symbols and signal words used in the manual.
2.2 Operator responsibility
Details the obligations and responsibilities of the machine operator.
2.3 Operating staff qualification
Specifies the required qualifications for personnel operating the machine.
2.4 Personal protective equipment
Lists the necessary personal protective equipment (PPE) for safe operation.
2.5 Safety identifications on the workshop press
Identifies and explains the safety labels affixed to the workshop press.
3 Intended use
3.1 Reasonably foreseeable misuse
Details potential misuses of the workshop press and defines misuse.
3.2 Residual risks
Lists potential residual risks that remain even when following safety instructions.
4 Technical data
4.1 Environmental conditions
Specifies the recommended environmental conditions for operating the press.
4.2 Type plate
Describes the information found on the machine's type plate.
4.3 Pressure gauge
Explains the scales and usage of the pressure gauge.
6 Machine description
6.1 Scope of supply
Lists the items included in the standard delivery of the workshop press.
6.2 Accessories
Details optional accessories available for the workshop press.
8 Installation
8.1 Installing crossbeam feet
Step-by-step guide for installing the crossbeam feet onto the press frame.
8.2 Installing the pressure gauge
Instructions for correctly installing the pressure gauge onto the hydraulic system.
8.3 Installing the pump unit
Procedure for assembling and connecting the pump unit to the press.
8.4 Installing the winch
Guide for installing the winch mechanism on specific workshop press models.
10 Commissioning
10.1 Adjusting the table height
Instructions for safely adjusting the working table height of the press.
10.2 Setting up the work area
Guidelines for preparing the workspace for safe workpiece processing.
10.3 Adjusting the horizontal working position
Procedure for aligning the workpiece horizontally with the hydraulic cylinder.
10.4 Aligning hydraulic cylinders
Describes how to manually position the hydraulic cylinder over the workpiece.
10.5 Building up pump pressure
Steps for building hydraulic pressure using the pump lever or pneumatic pump.
10.6 Retracting hydraulic cylinders
Explains how to retract the hydraulic cylinder after operation.
10.7 Mount pressure pin set
Instructions for mounting the pressure pin set and related components.
10.8 Processing the workpiece
Step-by-step guide for operating the press to process a workpiece.
11 Maintenance and repairs
11.1 Cleaning maintenance
Provides instructions for keeping the hydraulic workshop press clean.
11.2.1 Change the oil
Details the procedure for changing the hydraulic oil in the workshop press.
11.2.2 Visual inspection
Outlines the required visual inspections of the workshop press and their frequency.
11.2.3 Maintenance tasks
Lists the regular maintenance tasks to be performed on the workshop press.
11.2.4 Recommended processing materials
Specifies recommended hydraulic oils and greases for the workshop press.
11.2.5 Lubrication
Describes lubrication points and mediums for machine components.
12 Disposal, reusing used machines
12.1 Decommissioning
Procedure for safely decommissioning disused machines.
12.2 Disposing of lubricants
Guidance on the proper disposal of lubricants used with the machine.
13 Spare parts
13.1 Spare parts orders
Information on how to order spare parts, including required data.
13.2 Spare parts drawings
Provides detailed drawings for identifying and ordering spare parts.
Need help?
Do you have a question about the WPP 50 E and is the answer not in the manual?
Questions and answers