Related Manuals for unicraft WPP 30 E
Summarization of Contents
Introduction
Copyright
Legal notice regarding the protection of the operating instructions content.
Customer Service
Information on how to contact the manufacturer or retailer for questions.
Limitation of Liability
Disclaimer concerning manufacturer liability for damages.
Safety
Legend of Symbols
Explanation of safety symbols and signal terms used in the manual.
Operator Responsibility
Defines operator duties for safe machine operation and compliance.
Operating Staff Qualification
Specifies required skills for personnel handling the machine.
Personal Protective Equipment
Details essential protective gear for operating staff.
Safety Identifications on the Workshop Press
Information about safety labels attached to the machine.
Intended Use
Reasonably Foreseeable Misuse
Lists uses considered misuse of the hydraulic workshop press.
Residual Risks
Identifies inherent risks remaining even with safety precautions.
Technical Data
Environmental Conditions
Specifies operating and storage conditions for the machine.
Type Plate
Details information found on the machine's identification plate.
Pressure Gauge
Explains the scales and reading of the pressure gauge.
Machine Description
Scope of Supply
Lists the components included with the hydraulic workshop press.
Accessories
Details optional accessories available for the workshop press.
Installation
Installing Crossbeam Feet
Instructions for attaching the base support feet to the frame.
Installing the Pressure Gauge
Steps for mounting the pressure gauge onto the hydraulic system.
Installing the Pump Unit
Guidance on connecting the manual or pneumatic pump unit.
Installing the Winch
Procedure for attaching the winch mechanism to the press.
Commissioning
Adjusting the Table Height
Procedure for setting the press table to the desired working height.
Setting Up the Work Area
Ensuring the workspace is prepared for safe operation.
Adjusting the Horizontal Working Position
Aligning the workpiece to be horizontal to the hydraulic cylinder.
Aligning Hydraulic Cylinders
Manually positioning the hydraulic cylinder over the workpiece.
Building Up Pump Pressure
Steps to pressurize the hydraulic system using the pump.
Retracting Hydraulic Cylinders
Returning the hydraulic cylinder to its rest position.
Mount Pressure Pin Set
Instructions for installing the mandrel set onto the piston.
Processing the Workpiece
Detailed steps for performing operations on the workpiece.
Maintenance and Repairs
Cleaning Maintenance
Guidelines for keeping the hydraulic workshop press clean.
Change the oil
Procedure for draining and refilling the hydraulic oil.
Visual inspection
Regular checks for dirt, leaks, and component wear.
Maintenance tasks
Scheduled maintenance actions based on operating hours.
Recommended processing materials
Specifications for approved hydraulic oils and greases.
Lubrication
Instructions on lubricating machine components.
Disposal, Reusing Used Machines
Decommissioning
Steps for safely retiring a disused machine.
Disposing of Lubricants
Guidance on the proper disposal of lubricants.
Spare Parts
Spare Parts Orders
Information required for ordering spare parts.
Spare Parts Drawings
Diagrams identifying spare parts for service and replacement.
Need help?
Do you have a question about the WPP 30 E and is the answer not in the manual?
Questions and answers