unicraft SSK 1 Operating Instructions Manual

unicraft SSK 1 Operating Instructions Manual

Hide thumbs Also See for SSK 1:

Advertisement

Quick Links

Operating Instructions
Sandblasting Cabinet
SSK 1
SSK 1.5
SSK 1
SSK 1.5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SSK 1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for unicraft SSK 1

  • Page 1 Operating Instructions Sandblasting Cabinet SSK 1 SSK 1.5 SSK 1 SSK 1.5...
  • Page 2: Table Of Contents

    1.02 Language: english 10.1 Decommission ..........12 11 Spare parts............13 Author: 11.1 Spare parts drawing SSK 1 ......14 11.2 Spare parts drawing SSK 1.5 ......15 11 EC Declaration of Conformity ......16 12 Attachment............17 14 Notes ..............19 Indications regarding the operating instructions Copyright ©...
  • Page 3: Introduction

    All information and notes in these operating instructions You have made a good choice by purchasing the were summarised while taking applicable standards UNICRAFT Sandblasting Cabinet. and rules, the state-of-the-art technology and our long- term knowledge and experiences into consideration.
  • Page 4: Obligation Of The Operating Company

    Safety operating manuals for the operation of the sand- blasting cabinet. WARNING! - During the entire lifetime of the sandblasting cabi- This combination of symbol and signal words indi- net, the operating company must verify whether cates a possibly dangerous situation which may the operating manuals prepared by her corre- lead to death or severe injuries if they are not spond to the current status of the regulations, and...
  • Page 5: Personal Protective Equipment

    Safety Operator: Respiratory protection The operator is instructed by the operating company about the assigned tasks and possible risks in case of The respiratory protection protects the respiratory improper behaviour. Any tasks which need to be per- tract against the ingress of dust and small foreign formed beyond the operation in the standard mode bodies.
  • Page 6: Intended Use

    0,12 - connection thread 1/4 “ 0,25 mm (SSK1) and 0,12 - 0,18 mm (SSK 1.5).The wor- king pressure may be max. 8,6 bar(SSK1) and max. 7,9 Nozzle diameter 3,5 mm bar (SSK 1.5) amount.
  • Page 7: Nameplate

    If you discover any damage, immediately report it to the transport company or the dealer. Transport Fig. 3: Sandblasting cabinet SSK 1 NOTE! 1 Cover with seal and window Observe the weight of the device during transport 2 Exhaust opening, filter and lifting.
  • Page 8: Delivery

    (Fig. 5). (If not mounted yet) nozzles - Storage grid for storing the workpieces - exhaust filter - operating manual Zubehör SSK 1.5 - Glove - Filter Fig. 5: mounting filter - 3x ceramic nozzles 3,5 mm - 3x Protective film for viewing window Step 2: Attach the four rubber buffers to the underside of the cabin legs.
  • Page 9: Electrical Connection

    The sand blasting cabin must have a good ground- ing to avoid static electricity and sparking. The working pressure at the SSK 1.5 can be adjusted to the side of the SSK with the aid of the regulator (Fig.11). Step 1: Check if the mains voltage corresponds to the To adjust the working pressure, pull out the regulator voltage indicated on the nameplate.
  • Page 10: Commissioning

    Commissioning Commissioning ATTENTION! The sandblasting gun must always be directed away WARNING! from the operator. Never work with the sandblasting cabin door open. Danger of life! There is danger to your life if you do not follow these rules. ATTENTION! - Never work on the blast cabinet if you are under the influence of alcohol, drugs or medicines and / or Never use sand as abrasive.
  • Page 11: Care, Maintenance And Repair

    Care, maintenance and repair Care, maintenance and repair Clean the tool regularly from dirt. Regular cleaning ma- kes working with the pneumatic tool easier. After 10 to 12 hours of operation, check the nozzle. In case of uneven wear, the nozzle should be rotated by 1/ ATTENTION! 4 turn every 10 operating hours.
  • Page 12: Trouble Shooting

    Disposal, recycling of used devices 9.3 Trouble shooting ATTENTION! If any of the following errors occur, immediately stop working with the sandblasting gun. It can cause serious injury or damage to the tool. All repairs or replacement work must only be carried out by qua- lified and trained personnel.
  • Page 13: Spare Parts

    Spare parts 11 Spare parts Example The gloves for the Sandblasting cabin SSK 1 must be ordered. DANGER! Risk of injury through use The gloves are in the spare parts drawing with Item number 21 indicated. wrong spare parts! The use of incorrect or faulty replacement parts can...
  • Page 14: Spare Parts Drawing Ssk 1

    In case of service, the following drawing shall help to identify the necessary spare parts. If necessary, send a copy of the drawing with the marked components to your authorised dealer. Fig. 13: Spare parts drawing SSK 1 SSK-Series | Version 1.02...
  • Page 15: Spare Parts Drawing Ssk 1.5

    Spare parts 11.2 Spare parts drawing SSK 1.5 Fig. 14: Spare parts drawing SSK 1.5 SSK-Series | Version 1.02...
  • Page 16: Ec Declaration Of Conformity

    Stürmer Maschinen GmbH Manufacturer/distributing company: Dr.-Robert-Pfleger-Str. 26 D-96103 Hallstadt hereby declares that the following product Unicraft® Werkstatttechnik Product group: Sandblasting cabinet Machine type: SSK 1 Designation of Maschine: SSK 1.5 620 4000 Item number: 620 4010 ____________ Serial number: 20___...
  • Page 17: Attachment

    Attachment 13 Attachment Information zu den mitgelieferten Handschuhen/ Information about the supplied gloves Schutzhandschuhe 1 PaarArtikelnummer Protection gloves 1 Pair Item number HS-SSK1 6204100 YONGKANG XIEHENG ZHEJIANG PROVINCE INDUSTRY & COMMERCE CO., LTD. Hersteller: NO. 9 XISHAN WEST ROAD, ECONOMIC Manufacturer: SBC Gloves –...
  • Page 18 Attachment Information zu den mitgelieferten Handschuhen für SSK 1.5 1 Paar Artikelnummer Schutzhandschuhe Protection gloves 1 Pair Item number HS-SSK1.5 6204160 YONGKANG XIEHENG ZHEJIANG PROVINCE INDUSTRY & COMMERCE CO., LTD. Hersteller: NO. 9 XISHAN WEST ROAD, ECONOMIC Manufacturer: SBC 30 Gloves – Size XL...
  • Page 19: Notes

    Notes 14 Notes SSK-Series | Version 1.02...
  • Page 20 www.unicraft.de...

This manual is also suitable for:

Ssk 1.5

Table of Contents