TYAN TITAN TURBO AT-2 Manual page 42

STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FE
PCI SLOT C
LOAD SETUP DEFAULTS
ESC : Save & Exit Setup
F10 : Quit
Type the password, up to eight characters, and press <Enter>. The
password typed now will clear any previously entered password from
CMOS memory. You will be asked to confirm the password. Type the
password again and press <Enter>. To abort the selection and not enter
a password, press <Esc>.
To disable an existing password, press <Enter> when you are prompted to
enter a password. A message ("Password Disabled") will confirm that the
password has been disabled, the system will reboot, and you will be able to
enter Setup freely.
If you selected System in the Security Option category of the BIOS Fea-
tures Setup Menu (see page 29), you will be prompted for the password
every time the system is rebooted or any time you try to enter Setup. If you
selected Setup in the Security Option category of the BIOS Features Setup
Menu, you will be prompted only when you try to enter Setup.
S1571 D1181-001 http://www.tyan.com
ROM ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
PASSWORD SETTING
IDE HDD AUTO DETECTION
Enter Password
(Shift)F2 :Change Color
Change/Set/Disable Password
43
BIOS Configuration
SETUP
UT SAVING
:Select Item