Satellite Radio Tuner Control (Optional Accessory); Basic Operation; Preset Memory; Satellite Radio Setting - Kenwood KDC-HD545U Instruction Manual

Satellite Radio Tuner Control (Optional Accessory)
Basic Operation
Satellite Radio Setting
(Factory setting: Underlined)
4
Make a setting
Turn the [VOL] knob and press it when the
desired item is displayed.
5
Exit Function Setting mode
Press the [
~
] button for at least 1 second.
"ESN WATCH" Displays the Electronic Serial Number of satellite
radio.
,ESN=
"SEEK MODE" Selects the tuning mode of the radio.
CHANNEL Normal manual seeking controL
PRESET: Search in order of the channels in the
Preset memory
You can select following Satellite Radio Setting
items.
Function item 'Selectable setting/item
1
Select the Satellite Radio source
Press the [SRC] button.
Select the "SAri "SIRIUS"I "XM" display
2
Enter Function Setting mode
KDC-BT645U: Press the [VOL] knob for at least
1 second.
KDC-HD545U: Press the [VOL] knob.
"FUNCTION" is displayed
3
Select the function item
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "SETTINGS"
>
Function item.
.~
@j
KENWOOD
.
.:;
".
~
..
=~~~
2_"' _ li_313_O_' "
_E'_G_31_ _--,
[1]- [6]
Selecting Satellite Radio source
Press the [SRC] button.
Select the "SAri "SIRIUS"I"XM" display.
~
~
• You need to register to the service provider to receive
the service by Satellite Radio Consult the service
provider if"CALL ... TO SUBSCRIBE" appears.
• The radio may take a little time to start receiving after
you select the Satellite Radio source
• If the signal reception fails, "ACQUIRING SIGNAL''! "NO
SIGNAL" appears.
Selecting the Preset Band
Press the [BAND] button.
Each time you press the button, the receiving band
alternates between the SR1, SR2, SR3 and SR4.
Selecting the channel
Press the
[I~~]
or
[~]
button.
Selecting the preset channel
Press the [1] - [6] button.
Category and Channel Search
Preset Memory
Putting the channel in the memory.
1
Select the frequency to put in the memory
Press the
[I~~]
or
[~]
button.
2
Select the number to put in the memory
Press the [1] - [6] button for at least 2 seconds.
~
· Only the channel number is stored. Ca egory information
is not stored.
Selecting the channel and category you want to
receive.
1
Enter Category and Channel Search mode
Press the [
0. ]
button.
2
Select the Category
Press the [VOL] knob.
3
Select the Channel
Turn the [VOL] knob and press it when the
desired item is displayed.
Cancelling Category and Channel Search mode
Press the [
~]
button for at least 1 second.
28
I
KDC-BT645U1 KDC-HD545U