Kenwood KDC-HD545U Instruction Manual page 33

SIG. Hovvever,
it
may be impossible for such units to
• The units supporting the Bluetooth function have been
certified for conformity with the Bluetooth Standard
following the procedure prescribed by Bluetooth
About the Cell-Phone
This unit conforms to the following Bluetooth
specifications:
communicate with your cell-phone depending on its type.
• HFP is a profile used to make a hands-free call.
• OPP is a profile used to transfer data such as a phone book
between units.
About Satellite Radio tuner (Optional)
This unit supports Satellite Radio tuners which are
released by SIRIUS and XM.
Refer to the instruction manual of Satellite radio tuner.
About HD Radio Reception
(KDC-BT645U: Optional)
When you connect an HD Radio tuner, Tuner features
of the unit are disabled and changed to HD Radio
tuner features. With the HD Radio tuner, you can use
the similar functions ofTuner features.
About "KENWOOD Music Editor"
• This unit supports the PC application "KENWOOD
Music Editor Lite verl.O" or later.
• When you use the audio file with database
information added by the "KENWOOD Music Editor
Lite verlO'; you can search a file by title, album or
artist name using the <Music Search> (page 7).
• In the Instruction manual, the term "Music Editor
media" is used to mean the device that contains
audio files with database information added with
KENWOOD Music Editor.
• "KENWOOD Music Editor Lite verl.O" is available from
the following web site:
www.kenwood.com/cs/ce/
• For further information on "KENWOOD Music Editor
Lite verl.O", refer to the site above or the application
help.
Bluetooth Standard VeL 2.0
HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phone book Access Profile)
SYNC (Synchronization Profile)
Version
Profile
For operating KDC-HD545U with KCA-
B1200 (Optional)
Plugging a KCA-BT200 into the KDC-HD545U will
enable BT audio.
Selecting Bluetooth Audio source
Press the [SRC] button.
Select the "BT AUDIO EXT" display.
Pause
and
play
Press the [6] button.
Music Search
Press the
[~]
or
[~]
button.
e
For the cell-phones verified for compatibility, access
the following URL:
http://www.kenwood.com/cs/ce/btl
e
• Allor some of the operations above cannot be
performed if the Bluetooth audio player is not ready for
remote control.
• Switching between Bluetooth audio sources does
not start or stop playback automatically. Perform the
operation for starting or stopping playback.
• Some audio players cannot be controlled remotely or
reconnected after Bluetooth disconnection. Operate the
main unit of the audio player to connect Bluetooth.
• Set the Type Switch on KCA-BT200 as follows:
1: OFF, 2: OFF, 3 OFF
English
I
33