Table of Contents
Advertisement
Troubleshooting Guide
NO MUSIC DATA/ERROR 15
• The connected USB device contains no
playable audio file.
• Media was played that does not have data
recorded that the unit can play
TOO SOFT:
TOO LOUD
TOO LONG
VOice is too small and cannot be recognized.
Voice is too large to be recognized.
The word or utterance is too long
to
be
recognized
NO DATA
NO ENTRY
NO VOICE
USB ERROR:
Some trouble may have occurred to the
connected USB device.
l:
Remove the USB device, then cycle the
power switch to ON. If the same display is
repeated, use another USB device.
IPod ERROR:
Connection
to
the iPod has failed.
.:::>
Remove the USB device and then
reconnect it.
.:::. Confirm that the software for the iPod is
the latest version.
USB REMOVE (Blink)
The Remove mode has been selected for the
USB device/iPod. You can remove the USB
device/iPod safely.
NO NUMBER:
• The calling party does not notify a caller ID.
• There is no phone number data.
• There is no outgoing call list.
• There is no incoming call list.
• There is no missed call list
• There is no phone book list.
The cell-phone has not been registered
(pairing).
HF DISCONCT: The unit cannot communicate with the cell-
phone.
HF ERROR 07
The memory cannot be accessed.
.:::.> Turn off the power and on again. If this
message still appears, press the reset
button on the control unit
HF ERROR 68
The unit cannot communicate with the cell-
phone.
r~
Turn off the power and on again. If this
message still appears, press the reset
button on the control unit
UNKNOWN
The Bluetooth device cannot be detected.
DEVICE FULL
5 Bluetooth device have already been
registered No more Bluetooth device cannot
be registered.
PIN CODE NG
The PIN code is wrong.
CONNECT NG: The unit cannot be connected
to
the deVice.
NO PHONEBOOK
Data is not contained in the phone book.
NO MESSAGE
No short message In In Box.
NO RECORD:
The voice tag is not registered in the phone
book .
MEMORY FULL: The number of voice tags reaches the
maximum number
to
be registered in the
phone book.
NO ACCESS:
The procedure preset with mixed preset
memory function cannot be available.
The preset content may not be recalled
depending on the selected band or source.
No call.
MEMORY FULL: The tag memory of HD Radio receiver is FULL.
iPod FULL:
The iPod memory is FULL.
NO TAG FNC:
iPod which does not support the tag memory
is connected.
TAG ERROR:
The procedure is not registered to TAG
Memory function
N/A CHANNELS: No receivable channel and category.
PAIRING NG
Pairing error
NO MATCHING The voice tag is wrong. VOice cannot be
recognized because of an unregistered voice
tag, etc.
40
I
KDC-BT645U/ KDC-HD545U
Hide quick links:
Advertisement
Table of Contents
