Satellite Radio Tuner Control (Optional); Basic Operation; Category And Channel Search; Direct Access Tuning - Kenwood KDC-MP342U Instruction Manual

Function of KOC-MP342U
Satellite Radio tuner control (Optional)
Basic Operation
Selecting Satellite Radio source
Press the [SRC] button.
Select the "SAr/ "SIRIUS"/ "XM" display.
~
~
You need to register to the service provider to receive
the service by Satellite Radio Consult the service
provider if "CALL . TO SUBSCRIBE" appears.
The radio may take a little time to start receiving after
you select the Satellite Radio source.
If the signal reception fails, "Acquiring Signal"! "No Signal"
appears.
Switching Seek Mode
Display
~ration
-"-----~-------'---
"CHANNEl:' Normal manual seeking control.
"PRESET" Search in order of the channels in the Prese memory
For how to select menu items, refer to <Menu
System> (page 6).
Select the channel
Press the [~] or [~] button.
Selecting the Preset Band
Press the [FM+] button.
Each time you press the button, the preset band
alternates between the SR1, SR2, SR3 and SR4.
Channel
Scan
Press the [FM+] button for at least 2 seconds.
Pressing this button for 2 seconds or longer allows
you to check individual channel for 10 seconds
each. Pressing this button again for 2 seconds or
longer allows you to exit this mode.
Preset Memory
Press the desired [1] - [6] button for at least 2
seconds.
Preset Tuning
Press the desired [1] - [6] button.
14
I
KDC-MP342U/ KDC-MP242U
Category and Channel Search
Selecting the channel and category you want to
receive.
1
Enter Category and Channel Search mode
Press the Search button.
2
Select the Category
Press the [FM+] or [AM-] button.
3
Select the Channel
Press the [~] or [~] button.
Cancelling Category and Channel Search mode
Press the Search button.
~
~
You cannot Channel search until the category
information is acquired.
Function of remote control
Direct Access Tuning
Entering the channel and tuning.
1
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
2
Enter the channel
Press the number buttons.
3
Do Channel Search
Press the
[I....]
or
[~]
button.
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
~
~
If you make no button operation for 10 seconds, the
Direct Access Tuning mode is automatically canceled
If you cannot receive any signal in the input Channel due
to bad conditions on radio wave or other such problems,
"Acquiring Signal"/"No Signal" appears.
Function of KOC-MP342U
Satellite Radio tuner control (Optional)
Basic Operation
Selecting Satellite Radio source
Press the [SRC] button.
Select the "SAr/ "SIRIUS"/ "XM" display.
~
~
You need to register to the service provider to receive
the service by Satellite Radio Consult the service
provider if "CALL . TO SUBSCRIBE" appears.
The radio may take a little time to start receiving after
you select the Satellite Radio source.
If the signal reception fails, "Acquiring Signal"! "No Signal"
appears.
Switching Seek Mode
Display
~ration
-"-----~-------'---
"CHANNEl:' Normal manual seeking control.
"PRESET" Search in order of the channels in the Prese memory
For how to select menu items, refer to <Menu
System> (page 6).
Select the channel
Press the [~] or [~] button.
Selecting the Preset Band
Press the [FM+] button.
Each time you press the button, the preset band
alternates between the SR1, SR2, SR3 and SR4.
Channel
Scan
Press the [FM+] button for at least 2 seconds.
Pressing this button for 2 seconds or longer allows
you to check individual channel for 10 seconds
each. Pressing this button again for 2 seconds or
longer allows you to exit this mode.
Preset Memory
Press the desired [1] - [6] button for at least 2
seconds.
Preset Tuning
Press the desired [1] - [6] button.
14
I
KDC-MP342U/ KDC-MP242U
Category and Channel Search
Selecting the channel and category you want to
receive.
1
Enter Category and Channel Search mode
Press the Search button.
2
Select the Category
Press the [FM+] or [AM-] button.
3
Select the Channel
Press the [~] or [~] button.
Cancelling Category and Channel Search mode
Press the Search button.
~
~
You cannot Channel search until the category
information is acquired.
Function of remote control
Direct Access Tuning
Entering the channel and tuning.
1
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
2
Enter the channel
Press the number buttons.
3
Do Channel Search
Press the
[I....]
or
[~]
button.
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
~
~
If you make no button operation for 10 seconds, the
Direct Access Tuning mode is automatically canceled
If you cannot receive any signal in the input Channel due
to bad conditions on radio wave or other such problems,
"Acquiring Signal"/"No Signal" appears.