Kenwood KDC-HD545U Instruction Manual page 39

Cd-receiver
Hide thumbs Also See for KDC-HD545U:
Table of Contents

Advertisement

The messages shown below display your
systems condition.
TOC ERROR:
• No disc has been loaded in the disc
magazine.
• The CD is quite dirty. The CD is upside-
down. The CD is scratched a lot.
Bluetooth audio source
KDC-HD545U with KCA-BT200 (Optional)
fJ
The Bluetooth audio player cannot be registered
(pairing).
t/
The PIN code is fixed.
1&
When a PIN code is specified in the Instruction
Manual for Bluetooth Audio Player, register it
with reference to <Registering PIN Code> (page
24) to register the Bluetooth audio player. If no PIN
code is specified in the Instruction Manual, try
"0000"
fJ
The sound from the Bluetooth audio player is
discontinuous.
t/
The distance between this unit and audio player is
too far.
______
~ ~2Y:~
__
~~_~_9..~_(;ti.i?J?J~1~~_!"1~_il!_E'~_
to this unit.
t/
Another Bluetooth device is affecting the Bluetooth
communication.
1&
Turn off another Bluetooth device.
1&
Move another Bluetooth device away from this
unit
-i/--Another-siuetooth-de-vic-e-or-prOfile is used for
communication.
1&
The downloading of the Phone book or the SMS
disconnects the sound.
ERROR 05
ERROR
77:
ERROR 99
IN (Blink)
The disc is unreadable.
The unit is malfunctioning for some reason.
¢
Press the reset button on the unit.
If
the
"ERROR 77" code does not disappear,
consult your nearest service center
Something is wrong with the disc magazine.
Or the unit is malfunctioning for some reason.
¢
Check the disc magazine. And then press
the reset button on the unit.
If
the "ERROR
99" code does not disappear, consult your
nearest service center.
The CD player section is not operating
properly.
¢
Reinsert the CD. If the CD cannot be
ejected or the display continues to flash
even when the CD has been properly
reinserted, please switch off the power
and consult your nearest service center
PROTECT (Blink):
The speaker wire has a short-circuit or
touches the chassis of the vehicle, and then
the protection function is activated.
¢
Wire or insulate the speaker cable
properly and press the reset button. If
the "PROTECT" code does not disappear,
consult your nearest service center.
NA FILE:
An Audio file is played with a format that this
unit can't support.
COPY PRO:
A copy-protected file is played.
READ ERROR:
The file system of the connected USB device
is broken.
¢
Copy the files and folders for the USB
device again.
If
the error message is still
displayed, initialize the USB device or use
other USB devices.
NO DEVICE:
The USB device is selected as a source
although no USB device is connected.
¢
Change the source to any source other
than USB. Connect an USB device, and
change the source to USB again.
N/A DEVICE:
• An unsupported USB device is connected.
• Connection to the iPod has failed.
¢
Check that the connected iPod is an iPod
that is supported. See <About Audio file>
(page 32) for information on supported
iPods.
English
I
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-bt645u

Table of Contents