TYAN TIGERCUB ATX Manual page 43

Chipset Features Setup
Options specific to your system chipset.
Power Management Setup
Advanced Power Management (APM) options.
PnP/PCI Configuration
Plug and Play standard and PCI Local Bus configuration options.
Integrated Peripherals
I/O subsystems that depend on the integrated peripherals controller in
your system.
Supervisor/User Password
Change, set, or disable a password. In BIOS versions that allow
separate user and supervisor passwords, only the supervisor password
permits access to Setup. The user password generally allows only
power-on access.
IDE HDD Auto Detection
Automatically detect and configure IDE hard disk parameters.
Load BIOS Defaults
BIOS defaults are factory settings for the most stable, minimal-perfor-
mance system operations.
Load Setup Defaults
Setup defaults are factory settings for optimal-performance system
operations.
Save & Exit Setup
Save settings in nonvolatile CMOS RAM and exit Setup.
Exit Without Saving
Abandon all changes and exit Setup.
http://www.tyan.com
43