TYAN TIGERCUB ATX Manual page 41

In Case of Problems
If, after making and saving system changes with Setup, you discover
that your computer no longer is able to boot, the EliteBIOS supports an
override to the CMOS settings that resets your system to its default
configuration.
You can invoke this override by immediately pressing <Insert> when
you restart your computer. You can restart by either using the ON/OFF
switch, the RESET button or by pressing <Ctrl>, <Alt> and <Delete>
at the same time.
The best advice is to alter only settings that you thoroughly understand.
In particular, do not change settings in the Chipset screen without a
good reason. The Chipset defaults have been carefully chosen by
Award Software or your system manufacturer for the best perfor-
mance and reliability. Even a seemingly small change to the Chipset
setup may causing the system to become unstable.
Setup Variations
Not all systems have the same Setup. While the basic look and function
of the Setup program remains the same for all systems, the appearance
of your Setup screens may differ from the screens shown here. Each
system design and chipset combination require custom configurations.
In addition, the final appearance of the Setup program depends on your
system designer. Your system designer can decide that certain items
should not be available for user configuration and remove them from
the Setup program.
http://www.tyan.com
41