Addressing; Display Function - PROEL PLML250SE User Manual

CHANNEL 14 – FOCUS
This channel is dedicated to the motorized focus.

ADDRESSING

The Control Board on the front side of the PLML250SE allows you to assign the
DMX fixture address, which is defined as the first channel from which the
PLML250SE will respond to the controller. If you set, for example, the address to
channel 5, the PLML250SE will use the channel 5 to 20 for control.
Please, be sure that you don't have any overlapping channels in order to control
each PLML250SE correctly and independently from any other fixture on the
DMX data link.
If two, three or more PLML250SE have the same address, they will work in similar
mode.
For address setting follow this procedure:
- Switch on the PLML250SE and wait until the fixture reset has finished.
- Press the ""UP" and "DOWN" keys until the display shows "A" + the number of
the address channel.
- Confirm by pressing "ENTER" key and the letter "A" will flash.

DISPLAY FUNCTION

COLOR SLOPE
You can enable the linear rotation of the color wheel that allows to select two
colors at same time. To enable the Color Mode, press the MODE
F1
select . Press the UP
button. To disable this function, select
confirm.
PAN REVERSE
Press the MODE MODE button and select
MODE MODE
UP button and when the display shows UP UP UP
the display and press ENTER
TILT REVERSE
Press the MODE MODE button and select MODE MODE
UP button and when the display shows UP
UP UP
the display and press ENTER
31
UP button and when the display shows UP UP
F2
to enter into the PAN Reverse mode. Press
ENTER to confirm. ENTER ENTER
F3
to enter into the TILT Reverse mode. Press
ENTER to confirm.
ENTER ENTER
N
on the display and press ENTER
Y
. To disable this function, select
Y
. To disable this function, select
MODE button and MODE MODE
Y
press ENTER ENTER ENTER ENTER
ENTER to
ENTER ENTER
N
on
N
on