INDICE INDICE INDICE INDICE AVVERTENZE ................................. 3 CONDIZIONI DI UTILIZZO ............................4 MANUTENZIONE ................................. 4 SPECIFICHE TECNICHE............................... 5 TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS WARNING NORMS............................... 6 OPERATING DETERMINATIONS ..........................7 MAINTENANCE................................7 FEATURES AND SPECIFICATIONS.......................... 8 Tutte le specifiche riportate nel presente manuale sono soggette a variazioni senza preavviso The specifications related in this manual are subject to modifications...
Nel continuo sforzo di migliorare la qualità dei suoi prodotti, la Proel SpA Nel continuo sforzo di migliorare la qualità dei suoi prodotti, la Proel SpA Nel continuo sforzo di migliorare la qualità dei suoi prodotti, la Proel SpA Nel continuo sforzo di migliorare la qualità dei suoi prodotti, la Proel SpA può...
CONDIZIONI DI UTILIZZO Prendere in considerazione le rispettive norme nazionali durante l'installazione. Il dispositivo di fissaggio deve essere appeso su una struttura truss utilizzando un morsetto di montaggio (non incluso). Il dispositivo di fissaggio può essere inclinato + - 180 °. L’angolo di inclinazione del dispositivo può...
Please note that due to continuous product development, the specifications are subject to change without notice. Whilst every care is taken in the preparation of this manual Proel SpA reserves the right to change specifications in the course of the product improvement. The publishers cannot be held responsible for the accuracy of the information here in, or any consequence arising from them.
OPERATING DETERMINATIONS Consider the respective national norms during the installation. The fixture should be hung on a truss structure using a mounting clamp (not included). The fixture can be tilted + - 180°.The required tilt angle of the fixture can be adjusted by means of knobs on the side of the fixture. The installation must always be secured with a secondary safety attachment, e.g.
AC110V /AC230V ±10% 50HZ-60HZ Lamp DWE 120V 650W PAR36 Power consumption 1300W (PLAB2CN) 2600W (PLAB4CN) 5200W (PLAB8CN) Work environment In-door only Packing size mm 460x240x230 (PLAB2CN) mm 460x480x230 (PLAB4CN) mm 460×840×230 (PLAB8CN) Gross Weight Kg 2,5 (PLAB2CN) Kg 4,6 (PLAB4CN) Kg 9,2 (PLAB8CN)