Table of Contents
Advertisement
HAZARD
RISK OF
ELECTRICAL SHOCK
RISK FROM
FLYING OBJECTS
RISK TO BREATHING
RISK FROM
MOVING PARTS
RISK OF BURNS
SCWORPOL — 7/23/97
WHAT CAN HAPPEN
YOUR AIR COMPRESSOR IS POWERED BY
ELECTRICITY.
LIKE ANY OTHER ELECTRI-
CALLY POWERED DEVICE, IF IT IS NOT USED
PROPERLY IT MAY CAUSE ELECTRIC SHOCK.
REPAIRS ATTEMPTED BY UNQUALIFIED PER-
SONNEL CAN RESULT IN SERIOUS INJURY OR
DEATH BY ELECTROCUTION.
ELECTRICAL
GROUNDING:
PROVIDE ADEQUATE GROUNDING TO THIS
PRODUCT
COULD
RESULT
INJURY OR DEATH FROM ELECTROCUTION.
SEE GROUNDING INSTRUCTIONS.
THE COMPRESSED AIR STREAM CAN CAUSE
SOFT TISSUE DAMAGE TO EXPOSED SKIN AND
CAN PROPEL DIRT, CHIPS, LOOSE PARTICLES
AND
SMALL
OBJECTS
RESULTING IN PROPERTY DAMAGE OR PER-
SONAL INJURY.
THE COMPRESSED AIR FROM YOUR COM-
PRESSOR IS NOT SAFE FOR BREATHING! THE
AIR STREAM MAY CONTAIN CARBON MONOX-
IDE, TOXIC VAPORS OR SOLID PARTICLES.
SPRAYED MATERIALS SUCH AS PAINT, PAINT
SOLVENTS, PAINT REMOVER, INSECTICIDES,
WEED KILLERS, ETC.. CONTAIN HARMFUL
VAPORS AND POISONS.
THE
COMPRESSOR
CYCLES
CALLY WHEN THE PRESSURE SWITCH IS IN
THE ON/AUTO POSITION.
MOVING PARTS CAN CAUSE SERIOUS INJURY
OR DAMAGE IF THEY COME INTO CONTACT
WITH YOU OR YOUR CLOTHING.
ATTEMPTING
TO
OPERATE
COMPRESSOR WITH PROTECTIVE SHROUDS
REMOVED CAN EXPOSE YOU TO MOVING
PARTS AND ELECTRICAL SHOCK.
TOUCHING EXPOSED METAL SUCH AS THE
COMPRESSOR HEAD OR OUTLET TUBE CAN
RESULT IN SERIOUS BURNS.
NEVER OPERATE THE COMPRESSOR OUT-
DOORS WHEN IT IS RAINING OR IN WET
CONDITIONS.
NEVER OPERATE COMPRESSOR WITH COVER
COMPONENTS REMOVED OR DAMAGE.
ANY ELECTRICAL WIRING OR REPAIRS RE-
QUIRED ON THIS PRODUCT SHOULD BE
PERFORMED BY AUTHORIZED SERVICE CEN-
TER
NATIONAL AND LOCAL ELECTRICAL CODES.
MAKE
FAILURE
TO
CIRCUIT TO WHICH THE COMPRESSOR IS
CONNECTED PROVIDES PROPER ELECTRICAL
IN
SERIOUS
GROUNDING, CORRECT VOLTAGE AND AD-
EQUATE FUSE PROTECTION.
ALWAYS WEAR ANSI Z87.1 APPROVED SAFETY
GLASSES WITH SIDE SHIELDS WHEN USING
THE COMPRESSOR.
AT
HIGH
SPEED,
NEVER POINT ANY NOZZLE OR SPRAYER
TOWARD ANY PART OF THE BODY OR AT
OTHER PEOPLE OR ANIMALS.
ALWAYS
BLEED PRESSURE FROM THE AIR HOSE AND
TANK,
SOURCE
NANCE OR ATTACHING TOOLS AND ACCES-
SORIES.
NEVER INHALE AIR FROM THE COMPRESSOR
EITHER DIRECTLY OR FROM A BREATHING
DEVICE CONNECTED TO THE COMPRESSOR.
WORK IN AN AREA WITH GOOD CROSS-
VENTILATION.
SAFETY INSTRUCTIONS PROVIDED ON THE
LABEL OR SAFETY DATA SHEETS FOR THE
MATERIAL YOU ARE SPRAYING.
NIOSH/MSHA APPROVED RESPIRATOR DE-
SIGNED
APPLICATION.
ALWAYS
AUTOMATI-
BLEED PRESSURE FROM THE AIR HOSE AND
TANK,
SOURCE
NANCE OR ATTACHING TOOLS AND ACCES-
SORIES.
DO NOT REMOVE THE PROTECTIVE COVERS
FROM THIS PRODUCT. NEVER OPERATE THE
COMPRESSOR WITH GUARDS OR COVERS
WHICH ARE DAMAGED OR REMOVED.
ANY REPAIRS REQUIRED ON THIS PRODUCT
OR
REPAIR
SHOULD BE PERFORMED BY AUTHORIZED
SERVICE CENTER PERSONNEL.
NEVER TOUCH ANY EXPOSED METAL PARTS
ON COMPRESSOR DURING OR IMMEDIATELY
AFTER
REMAIN HOT FOR SEVERAL MINUTES AFTER
OPERATION.
DO
SHROUDS OR ATTEMPT MAINTENANCE UNTIL
UNIT HAS BEEN ALLOWED TO COOL.
4
HOW TO PREVENT IT
PERSONNEL
IN
ACCORDANCE
CERTAIN
THAT
THE
TURN
OFF
THE
COMPRESSOR,
AND
DISCONNECT
FROM
BEFORE
PERFORMING
READ
AND
FOLLOW
FOR
USE
WITH
YOUR
TURN
OFF
THE
COMPRESSOR,
AND
DISCONNECT
FROM
BEFORE
PERFORMING
OPERATION.
COMPRESSOR
NOT
REACH
AROUND
WITH
ELECTRICAL
POWER
MAINTE-
THE
USE A
SPECIFIC
POWER
MAINTE-
WILL
PROTECTIVE
Advertisement
Table of Contents
