Related Manuals for Vents Enave-T 240 P
Summarization of Contents
UNIT OPERATION MODES
HEAT RECOVERY
Explains how warm extract air heats cold fresh air for energy saving.
NO HEAT RECOVERY
Details bypass damper operation, maintaining unchanged intake air temperature.
FROST PROTECTION
Describes the unit's frost protection mechanism based on temperature sensor readings.
MOUNTING AND SET-UP
INSTALLING SENSORS
Guides on installing humidity and CO2 sensors onto the unit casing and connecting them.
UNIT INSTALLATION
Instructions for connecting straight air duct sections to unit spigots for optimal performance.
TECHNICAL MAINTENANCE
FILTER MAINTENANCE
Details filter cleaning and replacement frequency, including vacuum cleaning.
HEAT EXCHANGER MAINTENANCE
Explains annual cleaning of the heat exchanger using compressed air or vacuum.
TROUBLESHOOTING
FAN MAINTENANCE
Annual cleaning of fans with soft cloth, brush, or compressed air.
AIR INTAKE DEVICE MAINTENANCE
Semiannual check and cleaning of supply grilles for obstructions.
DUCTWORK SYSTEM MAINTENANCE
Describes cleaning or replacing air ducts approximately every 5 years.
CONTROL UNIT MAINTENANCE
Instructions on accessing and performing maintenance on the internal control unit.
Need help?
Do you have a question about the Enave-T 240 P and is the answer not in the manual?
Questions and answers