Adjusting The Volume Of The Speakers - Marantz NR1402 Owner's Manual

Adjusting the volume of the speakers

You can adjust the channel level either according to the playback
sources or to suit your taste, as described below.
n Adjusting the volume of the different speakers
1
Press AMP to set the remote
control unit to AMP-operation
mode.
2
Press CH LEVEL .
Channel Level
Front L -8.5dB
Front R -11.5dB
Subwoofer 0.0dB
Subwoofer ON
3
Use ui to select the speaker.
The speaker that can be set switches each time one of the
buttons is pressed.
BD
4
Use o p to adjust the volume.
• You can directly turn "OFF" the subwoofer outputs during
2-channel playback in DIRECT or STEREO mode.
o p
Select "Subwoofer" and use to select "ON" or "OFF".
Channel Level
Front L -8.5dB
Front R -11.5dB
Subwoofer OFF
When a headphone jack is inserted, the headphone channel level can
be adjusted.
40
n Adjusting the volume of groups of speakers
(Fader function)
This function lets you adjust (fade) the sound all at once from the
front (front speaker / front height speaker / center speaker) or rear
(surround speaker / surround back speaker).
1
AMP
Press to set the remote
control unit to AMP-operation
mode.
2
CH LEVEL
Press .
3
Press i to select "Fader", then
select the item to be adjusting
using o p.
Channel Level
Front L -1.0dB
Front R -1.0dB
Center -1.0dB
Subwoofer +0.5dB
Surround L 0.0dB
Surround R 0.0dB
Fader Front Rear
4
Use o p to adjust the volume of the speakers.
(o : front, p: rear)
• The fader function does not affect the subwoofer.
• The fader can be adjusted until the volume of the speaker is adjusted
to the lowest value of –12 dB.
Convenient functions