Basic Operation (Play Back); Selecting An Input Source; Adjusting The Main Volume; Adjusting The Tone (Bass & Treble) And - Marantz SR4021 User Manual

BASIC OPERATION
(PLAY BACK)

SELECTING AN INPUT SOURCE

Before you can listen to any input media, you must
fi rst select the input source on the SR4021.
Example : DVD
DOWN
BAND F/P AUTO TUNE T-MODE
BALANCE 1 SPEAKERS 2
MUTE
RECORDER
1 2 AUX VCR DSS DVD
To select DVD, simply press the DVD button on the
front panel or press the DVD button on the remote.
After you have selected DVD, simply turn on the DVD
player and play the DVD.
• The input name will appear in the display on the
front-panel.
• When an audio source is selected, the last video
input used remains routed to the VCR Output
and Monitor Output. This permits simultaneous
viewing and listening to different sources.
• When a Video source is selected, the video
signal for that input will be routed to the Monitor
Output jack and will be viewable on a TV monitor
connected to the SR4021.
12 12

ADJUSTING THE MAIN VOLUME

VOLUME VOLUME
DOWN DOWN UP UP
T-MODE
2
SOURCE
MUTE DIRECT
DVD
Adjust the volume to a comfortable level using
the VOLUME control knob on the front panel or
VOLUME 3 / 4 buttons on the remote.
To increase the volume, turn the VOLUME knob
clockwise or press VOLUME 3 button on the remote,
to decrease the volume, turn counterclockwise or
press VOLUME 4 button on the remote.
Note:
The volume can be adjusted within the range of – 80
to 0 dB, in steps of 1 dB.
ADJUSTING THE TONE (BASS & TREBLE)
AND BALANCE CONTROL
RECEIVER SR4021
MULTI JOG
1
SPEAKERS
2
DISPLAY OFF
CLEAR MEMORY BAND F/P
BASS BASS TREBLE TREBLE BALANCE BALANCE
SLEEP DIMMER
RECORDER
PHONO CD TUNER 1 2 A
STANDBY
POWER ON/OFF PHONES
During a listening session you may wish to adjust the
Bass and Treble Control and Balance Control to suit
your listening tastes or room acoustics.
(Using the SR4021)
1.
Press the BASS, TREBLE and BALANCE
buttons on the front panel to select your desired
control.
2.
Turn the MULTI JOG knob to adjust the
control.
BALANCE: Turn the knob clockwise to decrease
volume of the left channel and turn the
knob counter clockwise to decrease
volume of the right channel.
TREBLE: Turning the knob clockwise enhance
the high frequency band, while turning
counterclockwise attenuates the high
frequency band.
BASS: Turning the knob clockwise enhance
the low frequency band, while turning
counterclockwise attenuates the low
frequency band.
(Using the remote control unit)
To adjust the bass effect, press BASS 3 or BASS 4
on the remote.
To adjust the treble effect, press TREBLE 3 or
TREBLE 4 on the remote.
Balance Control cannot be adjusted with the remote
control unit.
Note:
When Source Direct mode is set, tone control is disable.

TEMPORARILY TURNING OFF THE SOUND

VOLUME
DOWN UP
T-MODE
2
SOURCE
MUTE MUTE DIRECT
DVD
To temporarily silence all speaker outputs such as
when interrupted by a phone call, press the MUTE
button on the front panel or MUTE button on the
remote.
This will interrupt the output to all speakers and the
head-phone jack, but it will not affect any recording
or dubbing that may be in progress.
When the system is muted, the display will show
"MUTE ON" .
Press the MUTE button again to return to normal
operation.