Playback (Basic Operation); Important Information; Selecting The Input Source - Marantz NR1402 Owner's Manual

Playback (Basic operation)

Settings (vpage 11)
n Selecting the input source (vpage 18)
n Adjusting the master volume (vpage 19)
n Turning off the sound temporarily (vpage 19)
n Playing a Blu-ray Disc player/DVD player
(vpage 19)
n Playing a CD player (vpage 19)
n Tuning in radio stations (vpage 20)
Selecting a listening mode (Surround mode)
(vpage 24)
Playback (Advanced operation) (vpage 38)
BD

Important information

Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.

Selecting the input source

Press the input source select button
( BD , DVD , SAT , TV , CD , TUNER or
M-XP
) twice to be played back.
BD DVD
When an input source select button ( ,
SAT TV CD TUNER M-XP
, , , or ) is pressed
once, the unit switches to device selected
by the operating mode of the remote control.
If the input source select button is then
pressed again twice, the input source for the
unit is switched.
Select input source "AUX" to play back music from an audio system
connected to the AUX INPUT jack.
The input source "GAME" is selected to playback from a game device
connected to GAME connector of HDMI IN.
Select the input source "AUX" or "GAME" using one of the following
methods.
• "Source Select" menu
("Using the "Source Select" menu" provided on the right)
SOURCE d f
• button on the remote control unit
SOURCE d f
("Using the button on the remote control unit"
(vpage 19))
INPUT SELECTOR
• knob on the main unit
("Using the knob on the main unit" (vpage 19))
18
You can also use the following operation to select an input
source.
n Using the "Source Select" menu
Source Select
Player
BD
DVD
CD
M-XPort
,
[ ] Move
3
q Press .
Display the "Source Select" menu.
uio p
w Use
ENTER
then press
The input source is set and the source
selection menu is turned off.
• Input sources that are not going to be used can be set ahead of time.
Make this setting at "Source Delete" (vpage 59).
• To turn off the source selection menu without selecting an input
3
source, press
3
• When is pressed, the AMP-operation mode starts automatically
(vpage 68).
Video Tuner
SAT TUNER
TV
GAME
AUX
The currently selected input
source is highlighted.
[ENTER] Enter
to select the input source,
.
again.
vSee overleaf