Directive 2009/125/EC for Energy-related Products (ErP). Follow all instructions. CAUTION: Do not use this apparatus near water. marantz Europe Clean only with dry cloth. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE A division of D&M Europe B.V.
n CAUTIONS ON INSTALLATION NOTES ON USE WARNINGS • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust. • Unplug the power cord when not using the unit for long periods of time.
Getting started Thank you for purchasing this marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Contents Accessories Advanced version ·······························································28 Getting started ··············································································1 Speaker installation/connection (Advanced) ··························29...
M-XPort (marantz-eXtension Port) (vpage 10) This unit is equipped with the M-XPort, a marantz original innovation • About condensation that provides outstanding expandability. You can connect the If there is a major difference in temperature between the inside of Setup wizard, providing easy-to-follow setup Wireless Receiver RX101 (sold separately) to this port.
Basic version Basic version Here, we explain the connections and basic operation methods for this unit. F Connections vpage 4 F Settings vpage 11 F Playback (Basic operation) vpage 18 F Selecting a listening mode (Surround mode) vpage 24 vpage 6, vpage 6, Connection Connection – vpage 19 Playback Playback...
Connections Important information • Make connections as follows before using this unit. Select an appropriate connection type Examples of screen display according to the devices to be connected. • You may need to make some settings on this unit depending on the connection method. Refer to • Menu screen • Status display screen each description for more information.
Connecting an HDMI-compatible device You can connect up to five HDMI-compatible devices (4-inputs/1-output) to the unit. About 3D function HDMI function This unit supports input and output of 3D (3 dimensional) video signals of HDMI 1.4a. This unit supports the following HDMI functions: To play back 3D video, you need a TV and player that provide support for the HDMI 1.4a 3D function and • 3D a pair of 3D glasses.
Page 9
Connecting an HDMI-compatible device Cables used for connections Audio and video cable (sold separately) • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an HDMI cable. HDMI cable • When connecting a device that supports Deep Color, please use a “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”.
Connecting a TV Connecting a Blu-ray Disc player/DVD player • Select the connector to use and connect the device. • You can enjoy video and audio from a Blu-ray Disc or DVD. • For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 5). • Select the connector to use and connect the device.
Connecting a set-top box (Satellite tuner/Cable TV) Connecting a portable audio player • You can watch satellite or cable TV. If a portable player is connected via the AUX INPUT jack of the unit, music from the portable player can • Select the connector to use and connect the device. be played.
Connecting a CD player Connecting an antenna • You can enjoy CD sound. • Connect the FM antenna or AM loop antenna supplied with the unit n AM loop antenna assembly • Select the connector to use and connect the device. to enjoy listening to radio broadcasts. Put the stand section • After connecting the antenna and receiving a broadcast signal Stand...
Connecting a wireless receiver (RX101) By connecting a wireless receiver RX101 (sold separately) to this unit, you can receive and playback audio signals from other devices using the Bluetooth Communication Function. • Use a Bluetooth device that is A2DP compatible (vpage 85 “A2DP”).
Settings Here, we explain “Audyssey ® Auto Setup”, which allows you to Set up speakers (Audyssey ® Auto Setup) automatically make the optimal settings for your speakers. n Set up speakers (Audyssey ® Auto Setup) The acoustic characteristics of the connected speakers and (vpage 11) About setup microphone placement listening room are measured and the optimum settings are made...
Page 15
Set up speakers (Audyssey ® Auto Setup) Set up the microphone Set up the subwoofer Set up the remote control unit Mount the setup microphone on a tripod or stand If using a subwoofer capable of the following n Set up the operation mode and place it in the main listening position.
Page 16
Set up speakers (Audyssey ® Auto Setup) STEP 2 STEP 1 Preparation Detect & Measure (Main) • In STEP 2, you will perform measurements at the main listening Connect the setup microphone to the SETUP MIC to select “Auto Setup Start” and then press position.
Page 17
Set up speakers (Audyssey ® Auto Setup) STEP 4 STEP 2 (Continued) STEP 3 Detect & Measure (Main) Measure (2nd – 6th) Calculate • In STEP 3, you will perform measurements at multiple positions (two NOTE On the screen, use to select “Next → to six positions) other than the main listening position.
Page 18
Set up speakers (Audyssey ® Auto Setup) STEP 5 STEP 6 Finish Check Store ENTER Unplug the setup microphone from the unit’s SETUP Select “Store” and then press to select the item you MIC jack. want to check, and then press Save the measurement results.
Set up speakers (Audyssey ® Auto Setup) Error messages NOTE • An error message is displayed if Audyssey ® Auto Setup could not be completed due to speaker placement, the measurement environment, etc. If this happens, check the relevant items, be sure to take the necessary measures, then perform Audyssey ®...
Page 20
Set up speakers (Audyssey ® Auto Setup) Parameter Check ENTER to select the item you want to check, then press This function enables you to check the measurement results and equalizer characteristics after Audyssey ® Measurement results for each speaker are displayed. Auto Setup.
Playback (Basic operation) Important information Settings (vpage 11) Before starting playback, make the connections between the different You can also use the following operation to select an input devices and the settings on the unit. source. n Selecting the input source (vpage 18) n Using the “Source Select”...
Important information Playing a Blu-ray Disc player/DVD n Using the SOURCE d f button on the remote Adjusting the master volume player control unit VOLUME +, – to adjust the The following describes the procedure for playing Blu-ray Disc player/ SOURCE SOURCE Press...
Tuning in radio stations n Presetting radio stations (Manual preset) Default settings Listening to FM/AM broadcasts Your favorite broadcast stations can be preset so that you can tune Block (A – G) TUNER Press twice to switch the them in easily. Up to 56 stations can be preset. Default Settings input source to “TUNER”.
Page 24
Tuning in radio stations n Listening to preset stations n Direct frequency tuning n RDS search You can enter the receiving frequency directly to tune in. Use this function to automatically tune to FM stations that provide SHIFT/TOP MENU Press to select the RDS service.
Page 25
Tuning in radio stations PTY (Program Type) n PTY search TP (Traffic Program) Use this function to find RDS stations broadcasting a designated PTY identifies the type of RDS program. TP identifies programs that carry traffic announcements. program type (PTY). The program types and their displays are as follows: This allows you to easily find out the latest traffic conditions in your TUNER...
Page 26
0 – 9 Direct frequency tuning (0 – 9) RDS station Program category TV power on/standby Traffic info TV Z / X (Default : marantz) While pressing down MENU BAND , press Switch TV input STANDBY to turn on the power.
Selecting a listening mode (Surround mode) This unit can play input audio signals in multi-channel surround mode or in stereo mode. Selecting a listening mode Select a listening mode suitable for the playback contents (movie, music, etc.) or according to your liking. Play the selected device (vpage 19).
Page 28
Selecting a listening mode n Listening mode SURROUND AUTO STEREO P.DIRECT • The following listening modes can be selected using the buttons. • Adjust the sound field effect with the menu “Surr.Parameter” (vpage 49) to enjoy your favorite sound mode. z1 2-channel also includes analog input. Operation Operation Input signal...
Page 29
Selecting a listening mode n Description of listening mode types Dolby listening mode DTS listening mode Listening mode type Description Listening mode type Description DOLBY PLgx This mode can be selected when a Dolby Pro Logic gx decoder is used to DTS NEO:6 This mode can be selected when a DTS NEO:6 decoder is used to play back 2-channel source in 6.1/7.1-channel surround sound including the surround...
Page 30
Selecting a listening mode marantz original listening mode Direct listening mode Listening mode type Description Listening mode type Description MULTI CH STEREO This mode is for enjoying stereo sound from all speakers. DIRECT This mode plays back tracks at high sound quality without passing through the The same sound as that from the front speakers (L/R) is played back at the sound quality adjustment circuits.
Advanced version Advanced version Here, we explain functions and operations that let you make better use of this unit. F Speaker installation/connection (Advanced) vpage 29 F Connections (Advanced connection) vpage 37 F Playback (Advanced operation) vpage 38 F How to make detailed settings vpage 43 F Other settings vpage 67...
Speaker installation/connection (Advanced) Here we describe the installation, connection and Install setup methods for speakers other than 5.1-channel speakers. For the installation, connection and setup When 7.1ch (Surround back speaker) installed methods for 5.1-channel speakers, see C page 4 This unit is compatible with Dolby Pro Logic gz (vpage ...
Page 33
Install When 7.1ch (Front height speaker) installed When 6.1ch (Surround back speaker) installed When 2.1ch speakers installed Listening position Listening position Listening position z1 22˚ – 30˚ z2 22˚ – 45˚ z3 90˚ – 110˚ GSpeaker abbreviationsH z1 22˚ – 30˚ z2 90˚...
Connect C page • For the method of connecting 5.1-channel speakers, see 6 “Connecting the speakers”. • For the method of connecting the TV, see C page 3 “Connect this unit to the television using an HDMI cable (sold separately)”. 7.1-channel (Surround back speaker) connection The illustration on the right shows a connection example for performing 7.1-channel playback using the surround back speakers.
Page 35
Connect 7.1-channel (Front height speaker) connection The illustration on the right shows a connection example for performing 7.1-channel playback using the front height speakers. To perform 7.1-channel playback using the front height speaker, set “Pre Assign” to “F.HEIGHT” in steps 3 and 4 for “Set up “Pre Assign””...
Page 36
Connect 6.1-channel (Surround back speaker) connection If using only one surround back speaker (with a 6.1-channel connection), connect to the “L” side of the FL/SBL/HL connector. For speaker settings in this case, see “When 6.1ch (Surround back speaker) installed” (vpage 30). To perform 6.1-channel playback using the surround back speaker, set “Pre Assign”...
Page 37
Connect 2.1-channel connection The PRE OUT connectors can be used to connect front speakers. In this case, follow procedures 3 and 4 in “Set up “Pre Assign”” (vpage 35), and set “Pre Assign” to “FRONT”. Power amplifier NOTE C page 6 “Connecting the • For speaker cable connections, see speakers”.
Set up speakers around items indicate the settings. Here we describe how to set up speakers other than 5.1-channel speakers. For the method of setting up 5.1-channel speakers, see C page 4 “Setup Wizard”. First install and connect the speakers to this unit. Before Auto Setup measurement, the settings shown below can be made.
Page 39
Set up speakers select to set whether or not a surround back Set up “Channel Select” configuration of the connected channel is measured. to select “Channel Select”, and then press speakers. Measure ENTER Set for measuring two surround back speakers. (2 sp) Measure Audyssey Auto Setup...
Connections (Advanced connection) Connecting the remote control connectors You can control other marantz products through this unit with the remote control unit by connecting the REMOTE CONTROL connectors on each unit. • The signal transmitted from the remote control unit is received by the remote sensor on this unit.
Playback (Advanced operation) Convenient functions Settings (vpage 11) HDMI control function n Setting procedure Playback (Basic operation) (vpage 18) Set the HDMI output connector corresponding with If you connect the unit and an HDMI control function compatible TV or the HDMI control function. player with an HDMI cable and then enable the HDMI control function setting on each device, the devices will be able to control each other.
Convenient functions Sleep timer function NOTE • When “HDMI Control” is set to “ON”, it consumes more The power automatically goes into standby once the set time has standby power. elapsed. • The HDMI control function controls operations of a TV that is This is convenient for playing sources while going to sleep.
Convenient functions Adjusting the volume of the speakers n Adjusting the volume of groups of speakers Use o p to adjust the volume. (Fader function) You can adjust the channel level either according to the playback This function lets you adjust (fade) the sound all at once from the sources or to suit your taste, as described below.
Convenient functions Dual backup memory function Panel lock function The unit stores settings information in nonvolatile memory even when the main power supply is turned off. Using the Dual Backup Memory To prevent accidental operation of this unit, you can disable operation function, you can write settings information to another memory area to back up saved settings for recovery anytime as needed.
Convenient functions Various memory functions n Personal memory plus function This function sets the settings (input mode, surround mode, HDMI output mode, MultEQ ® , Dynamic EQ ® , audio delay etc.) last selected for the individual input sources. The surround parameters, tone settings and the volumes of the different speakers are stored for the individual surround modes.
How to make detailed settings Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. Setting items Detailed items Description Page Audio Adjust Surr.Parameter Adjusts surround sound parameters.
Examples of menu screen displays Typical examples are described below. GExample 2H Audyssey ® Auto Setup screen GExample 1H Menu selection screen (Top menu) (with illustration) Menu Audyssey Auto Setup MultEQ Audio Adjust Surr.Parameter Information Tone Preparation Setup Wizard AudysseySettings Set the following items System Setup Manual EQ...
Examples of menu and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. Menu display Front display Description AMP MENU q Press to display the menu Top menu display screen. Menu w TV screen: Displays the selected line.
Inputting characters Keyboard screen You can change the names as desired using the “Preset Name” Using the keyboard screen (vpage 63) and “Rename” (vpage 66). For inputting characters, there are two methods, as shown below. Display the screen for inputting n Display of a keyboard input screen characters (vpage 43 Method for inputting characters...
Page 50
Inputting characters Cursor mode screen Using the cursor buttons Display the screen for inputting characters n Display of a cursor mode screen (vpage 43 “Menu map”). Rename Press SEARCH/INFO while a keyboard screen is [1/2] displayed. Default A cursor mode screen is displayed. Use o p to set the cursor to the character you want to change.
Audio Adjust The sound being played in the surround mode can be adjusted to your liking. Items that can be set with the “Audio Adjust” procedure The items (parameters) that can be adjusted depend on the signal being input and the currently set surround mode.
Page 52
Audio Adjust Surr.Parameter Setting items Setting details Default settings are underlined. C.Width 0 – 7 (3) Adjust surround sound parameters. It may not be possible to set this item depending on the input signal Assign center channel (vpage 80 “Surround modes and surround parameters”). signal to front left and right channels for wider sound.
Page 53
Audio Adjust Tone Audyssey Settings Default settings are underlined. Set Audyssey MultEQ ® , Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® . These can be selected Adjust the tonal quality of the sound. after Audyssey ® Auto Setup has been performed. For additional information on Audyssey technology, Setting items Setting details please see page 85.
Page 54
Audio Adjust Setting items Setting details Setting items Setting details Dynamic EQ ® ON : Use Dynamic EQ ® . Dynamic Volume ® Heavy : Most adjustment to loudest and softest sounds. OFF : Do not use Dynamic EQ ® . Solve the problem of Solve the problem of large Medium : Medium adjustment to loudest and softest sound.
Audio Adjust Manual EQ M-DAX Default settings are underlined. Default settings are underlined. Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the Use the graphic equalizer to adjust the tone of each speaker. “Manual EQ” can be set when “MultEQ ® ” setting (vpage 50) is “Manual”. amount of data by eliminating signal components that are hard for the human ear to hear.
Information Show information about receiver settings, input signals, etc. Items Setting details Status The information displayed differs according to the input source. Show information about Select Source / Name / Surround Mode / Input Mode / current settings. Decode Mode / Assign / Video Select / Video Mode / Content Type etc.
System Setup Set when changing Audyssey ® Auto Setup settings, or when changing the audio, video, display Items that can be set with the “System Setup” procedure or other settings. • If you change the speaker settings after performing Audyssey ® Auto Setup, it will not be possible to set Audyssey MultEQ ®...
Page 58
System Setup Setting items Setting details Speaker Setup Default settings are underlined. Speaker Config. Subwoofer : Set the presence of a subwoofer. (Continued) • Yes : Use a subwoofer. Perform when setting the speakers manually or when changing settings made in Audyssey ® Auto Setup. • No : Select when a subwoofer is not connected.
Page 59
System Setup Setting items Setting details Setting items Setting details Speaker Config. F.Height : Set the presence and size of the front height speakers. Distance Unit : Set the unit of distance. (Continued) • Large : Use a large speaker that can adequately play back low Set distance from listening • Meters / Feet position to speakers.
Page 60
System Setup Setting items Setting details Setting items Setting details Channel Level Test Tone Start : Output test tone. Crossover Freq. Crossover : Set the crossover frequency. Set the volume of the test • Front L / F.Height L / Center / F.Height R / Front R / Surround R / Set the maximum frequency • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / of the bass signal output...
System Setup Setting items Setting details HDMI Setup Default settings are underlined. Standby Source Last : This item is set at the last-used input source. Sets the HDMI input source HDMI1 / HDMI2 / HDMI3 / HDMI4 : Put the respective input source into Make settings for HDMI video/audio output.
Page 62
System Setup Audio Setup Option Setup Default settings are underlined. Default settings are underlined. Make settings for audio playback. Make various other settings. Setting items Setting details Setting items Setting details EQ Customize Manual : Set when not using the “Manual” equalizer. Volume Control Volume Display : Set how volume is displayed.
Page 63
System Setup Setting items Setting details Setting items Setting details Screensaver : Make screensaver settings. Display ON : Display is always on. Make the settings related to • ON : The screensaver is activated during menu Set the display on/off Auto OFF : Display is off except when showing the status display. setting.
Page 64
System Setup Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Deutsch / Français “Language” can also be set by the following procedure. However, the menu screen is not displayed. MENU ENTER 1.
Input Setup Perform settings related to input source playback. Items that can be set with the “Input Setup” procedure • You do not have to change the settings to use the unit. Make settings when needed. Menu operation Auto Preset (vpage 63) Press AMP MENU to set the remote control unit to AMP-...
Input Setup Auto Preset Preset Name Use the auto preset function to program radio stations. Assign name to a preset memory. Setting items Setting details Setting items Setting details A / B / C / D / E / F / G Start Block If an FM station cannot be preset automatically, select the desired...
Input Setup Input Assign Setting items Setting details HDMI HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 Examples of “Input Assign” menu screen displays Set this to change the HDMI None : Do not assign an HDMI input connector to the selected input input connectors assigned source.
Page 68
Input Setup Video Setting items Setting details Default settings are underlined. COMPONENT 1-RCA / 2-RCA Set this to change the digital None : Do not assign a component video input connector to the selected Set the source video. input connectors assigned input source.
Page 69
Input Setup Input Mode (Audio) Rename Default settings are underlined. The input modes available for selection may vary depending on the input source. Change the display name of the selected input source. Setting items Setting details Setting items Setting details Input Mode Auto : Automatically detect input signal and perform playback.
Other settings Remote control settings • When you connect a remote control receiver unit (purchased separately) to the REMOTE CONTROL IN connector of this unit, use the following procedure to disable the remote sensor function of this unit. • The remote sensor function of remote control signals is enabled by default. SURROUND MODE ON/STANDBY STATUS...
The operation mode of the remote Device registered on the control unit is switched as shown in the button table. Device registered on the button marantz CD player TUNER Radio of this unit M-XP Device registered on the M-XPort button...
Entering a 4-digit code registered. Press and hold down the input • In the factory settings, remote control codes for all marantz products See the preset code list table for the code to be input. source select buttons for the are registered.
Input source does not blink. Preset select Category Brand code buttons Blu-ray Disc player marantz 5000 Then press to check the second digit of the code. Now press to check the third and fourth DVD player marantz 2000 digits of the code.
Playback TV Z / X • For details, refer to the device’s operating (Default : marantz) Stop instructions. TV INPUT Switch TV input (Default : marantz) Auto search (cue) Manual search (fast-reverse/fast-forward) Select title, chapter or channel 0 – 9 selection...
Page 75
0 – 9 Channel selection TV Z / X (Default : marantz) Clear the inputting TV INPUT Switch TV input (Default : marantz) TV power on/standby TV Z / X CHANNEL +, – Switch channels (up/down) (Default : marantz) TV INPUT Switch TV input (Default : marantz) CHANNEL +, –...
Information Information Here, we list various information related to this unit. Please refer to this information as needed. F Part names and functions vpage 74 F Other information vpage 79 F Troubleshooting vpage 87 F Specifications vpage 90 F Index vpage 91 F List of preset codes vpage 93...
Part names and functions Front panel For buttons not explained here, see the page indicated in parentheses ( ). Power indicator (STANDBY) ············································ SETUP MIC jack ································································· (13, 35) PURE DIRECT button ························································ (24, 41) Q6 5 Power operation button SURROUND MODE button ···············································...
Display Audyssey ® indicators Decoder indicators Input mode indicators Light up as follows, depending on the setting of “MultEQ ® ” These light when the respective decoders are operating. Set the audio input modes for the different input sources 50), “Dynamic EQ ® ” (vpage ...
Rear panel See the page indicated in parentheses ( ). FM/AM antenna terminals ······················································· (9) HDMI connectors ··························································· 3, 6) NOTE Analog audio connectors ·················································· (7, 8, 9) Digital audio connectors ······················································· (7, 9) Do not touch the inner pins of the connectors on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). SET button ············································ (69, 70) REPEAT button (0) SOURCE power button System buttons ···································· (71, 72) (Z/X) ·················································· (69, 71, 72) • Pause button (3) • Play button (1) VIDEO SELECT button ·······························...
Page 81
Remote control unit Inserting the batteries Operating range of the remote control unit Point the remote control unit at the remote sensor when operating it. q Remove the rear lid in the w Load the two batteries properly direction of the arrow and as indicated by the marks in remove it.
Other information Trademark information n Trademark information (vpage 79) This product uses the following technologies: n Surround (vpage 80) n Relationship between video signals and monitor Manufactured under license from output (vpage 84) Dolby Laboratories. “Dolby”, “Pro n Explanation of terms (vpage 85) Logic” and the double-D symbol are trademarks of Dolby Laboratories.
Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Surround modes and surround parameters This table shows the speakers that can be used in each surround mode and the surround parameters adjustable in each surround mode. Symbols in the table S This indicates the audio output channels or surround parameters that can be set.
Page 84
Surround Surr.Parameter (vpage 49) Audyssey Settings z9 (vpage 50) NEO:6 Music PRO LOGIC g/gx Music mode only mode only Tone M-DAX Height Gain Surround mode (vpage 24) Dynamic Dynamic EQ ® (vpage 50) MultEQ ® Volume ® (vpage 52) Panorama Dimension C.Width C.Image (vpage 49) (vpage 49) (vpage 49) (vpage 49) (vpage 49)
Page 85
Surround n Types of input signals, and corresponding surround modes This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode. Symbols in the table S This indicates the selectable surround mode.
Page 86
Surround Input signal types and formats DTS-HD DOLBY DOLBY DIGITAL NOTE Surround mode (vpage 24) DTS-HD DTS-HD High DTS ES DTS ES DOLBY DIGITAL ANALOG DOLBY DOLBY DOLBY DIGITAL DOLBY DIGITAL DOLBY DIGITAL Master Resolution DSCRT MTRX DTS 96/24 EX (With no (multi ch) (2ch) EXPRESS...
Relationship between video signals and monitor output Input connector Output connector Menu displayed HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO Only the menu is displayed S <VIDEO> Only the menu is displayed A (VIDEO) S <COMPONENT> Only the menu is displayed A (COMPONENT) S <COMPONENT>...
Explanation of terms Dolby Pro Logic g Dolby TrueHD Dolby TrueHD is a high definition audio technology Dolby Pro Logic g is a matrix decoding technology Bluetooth A2DP developed by Dolby Laboratories. developed by Dolby Laboratories, using lossless Bluetooth is a short-distance wireless communication A2DP is one profile of Bluetooth definded for Regular music such as that on CDs is encoded into coding technology to faithfully reproduce the sound...
Page 89
Explanation of terms DTS Express DTS Express is an audio format supporting low bit HDCP Sampling frequency rates (max. 5.1 channels, 24 to 256 kbps). When transmitting digital signals between devices, Sampling involves taking a reading of a sound wave DTS-HD this copyright protection technology encrypts (analog signal) at regular intervals and expressing...
• This unit amplifier circuit has failed. Turn off the power and please – No picture appears. • Check the TV connection. power, the power contact the marantz service adviser. • Set the TV input correctly. indicator is blinking red in intervals of approximately 0.5 seconds.
Page 91
GAudioH Symptom Cause/Solution Page Symptom Cause/Solution Page • Check that “Speaker Config.” – “Center” or “Surround” is set Dolby PLg mode or Audio is not output. • Check the connections for all devices. to other than “None”. If the speaker system is 2.0/2.1ch, this DTS NEO:6 mode surround mode cannot be selected.
GM-XPortH Resetting the microprocessor Symptom Cause/Solution Page Perform this procedure if the display is abnormal or if operations cannot be performed. Audio is not output • Check that the Bluetooth device and Wireless receiver (RX101) When the microprocessor is reset, all the settings are reset to their default values. when a wireless are correctly paired.
Need help?
Do you have a question about the NR1402 and is the answer not in the manual?
Questions and answers