Table of Contents
Advertisement
Connect
• For the method of connecting 5.1-channel speakers, see
6 "Connecting the
speakers".
• For the method of connecting the TV, see
C page 3 "Connect this
unit to the television using an HDMI cable (sold
7.1-channel (Surround back speaker) connection
The illustration on the right shows a connection example for performing
7.1-channel playback using the surround back speakers.
To perform 7.1-channel playback using the surround back speakers,
set "Pre Assign" to "NORMAL" in steps 3 and 4 for "Set up "Pre
Assign"" (vpage 35).
Also use the "Speaker Config." setting
"S.Back" to "2spkrs".
NOTE
• A power amplifier (sold separately) is required for this connection.
• For speaker cable connections, see
C page 6 "Connecting the
speakers".
• Connect so that the speaker cable core wires do not protrude
from the speaker terminal. The protection circuit may be
activated if the core wires touch the rear panel or if the + and
– sides touch each other
(vpage 86
"Protection Circuit").
• Never touch the speaker terminals while the power supply is
connected. Doing so could result in electric shock (When the
Setup wizard is running, follow the instructions in the Setup
wizard screen for making connections.).
• Use speakers with the speaker impedances shown below.
Speaker terminals
Speaker impedance
FRONT
CENTER
SURROUND
C page
separately)".
(vpage
55) to set
6 – 8 Ω
Power amplifier
L
R
IN
R
L
FL
SW
C
SL
SBL
SBR
31
FR
SR
Hide quick links:
Advertisement
Table of Contents
