Operating The Connected Devices By Remote Control Unit; Operating Av Devices - Marantz NR1402 Owner's Manual

Operating the connected devices by remote control unit

Registering the supplied preset codes in the remote control unit
enables you to operate devices made by other manufacturers.

Operating AV devices

1
Press the input source select
button (vpage 18).
The operation mode of the remote
control unit is switched as shown in the
table.
NOTE
Press the input source select buttons once to switch the operation
mode of the remote control unit supplied with this unit.
Press the input source select buttons twice consecutively to switch
the operation mode of the remote control unit and input source of
this unit.
Operation mode
Input
Input source
source of
Devices controllable with the
select button
this unit
remote control unit
Device registered on the
z
BD
button
Device registered on the
z
DVD
button
Device registered on the
z
SAT
button
Device registered on the
z
TV
button
z
CD marantz CD player
TUNER Radio of this unit
Device registered on the
M-XPort
button
z If a preset code is registered for this button, the remote control
unit of this unit can control another devices.
When 3 is pressed, the AMP-operation mode starts automatically.
NOTE
If the mode of the remote control unit is set to other than AMP-
AMP
operation mode, press to switch the remote control unit to the
AMP-operation mode to perform the following operations:
• For setting the channel level of the unit by pressing
• For performing direct playback.
• For using the Video Select function.
• For using the sleep timer function.
• For switching the M-DAX function.
• For directly selecting "AUTO" and "STEREO" of the listening
modes.
• For using the test tone function.
• For using the HT-EQ function.
68
2
Operate this unit or the device whose input source is
switched.
• For details, refer to the operating instructions for each device.
BD For operations of TUNER, see the following pages.
• TUNER (vpage 23)
DVD
SAT
TV
M-XP
CH LEVEL
.