Advertisement
Quick Links
Advertisement
Related Manuals for Snow Peak FES-652
Summarization of Contents
Name of the Parts
Fly Sheet Parts Identification
Details the components of the fly sheet section of the tent.
Inner Tent Parts Identification
Details the components of the inner tent section of the tent.
Ground Sheet Parts Identification
Details the components of the ground sheet section of the tent.
Preparation Before Use
Seam Sealing Procedure
Instructions on applying seam sealer for waterproofing sewn areas.
Setup Procedure
Prepare Inner Tent and Orient
Spread the inner tent on flat ground, considering wind direction.
Insert Double Cross Poles
Insert double cross poles into sleeves, matching dark blue tape.
Setup Procedure
Attach Opposite Cross Pole
Connect the opposite end of the double cross pole to the corner tape.
Insert Center Pole into Sleeves
Insert the center pole into sleeves, matching black tape.
Setup Procedure
Connect Center Pole to Grommets
Connect center pole ends to inner grommets, matching black tape.
Peg Down Tent and Ground Sheet
Peg down tent and ground sheet loops sequentially, removing slack.
Setup Procedure
Position and Attach Fly Sheet
Spread and align the fly sheet with the inner tent, connecting buckles.
Cover Inner Tent with Fly
Drape the fly sheet over the inner tent and adjust for panel alignment.
Setup Procedure
Secure Fly Sheet with Velcro
Wind velcro tape on the inside of the fly around poles.
Insert Vestibule Pole
Pass vestibule pole through sleeve, pushing to the center.
Setup Procedure
Secure Vestibule Panel
Peg down the vestibule panel using the rubber loop.
Attach Guy Lines and Tension
Attach guy lines to fly sheet, peg down, and apply tension.
Disassembly Procedure
Remove Pegs and Ropes
Pull pegs from ground and gather ropes.
Remove Vestibule Pole
Detach plastic hooks and remove vestibule pole from fly.
Disassembly Procedure
Remove Tent Poles
Remove plastic hooks and then poles from the inner tent.
Fold and Pack Tent Components
Fold fly, inner tent, and ground sheet, then pack into carry bag.
Quality Assurance
Repair Process
Details on requesting repairs, preparation, and cost coverage.
Name of the Parts
Fly Part Identification
Identifies components of the tent's fly sheet.
Inner Tent Part Identification
Identifies components of the tent's inner tent.
Ground Sheet Part Identification
Identifies components of the tent's ground sheet.
Rope Attachment and Peg-down
Single Rope Attachment
Instructions for attaching a single rope with a tensioner.
Forked Rope Attachment
Instructions for attaching a forked rope with a tensioner.
Rope Attachment and Peg-down
Seam Sealer Application
Guide to applying seam sealer on specific tent areas.
Set-up Procedure
Prepare Inner Tent and Orient
Lay out the inner tent on flat ground, considering wind direction.
Insert Double Cross Poles
Insert double cross poles into sleeves, matching dark blue tape.
Set-up Procedure
Attach Opposite Cross Pole
Connect the opposite end of the double cross pole to the corner tape.
Insert Center Pole into Sleeves
Insert the center pole into sleeves, matching black tape.
Set-up Procedure
Connect Center Pole to Grommets
Connect center pole ends to inner grommets, matching black tape.
Peg Down Tent and Ground Sheet
Peg down tent and ground sheet loops sequentially, removing slack.
Set-up Procedure
Position and Attach Fly Sheet
Spread and align the fly sheet with the inner tent, connecting buckles.
Cover Inner Tent with Fly
Drape the fly sheet over the inner tent and adjust for panel alignment.
Set-up Procedure
Secure Fly Sheet with Velcro
Wind velcro tape on the inside of the fly around poles.
Insert Vestibule Pole
Pass vestibule pole through sleeve, pushing to the center.
Set-up Procedure
Secure Vestibule Panel
Peg down the vestibule panel using the rubber loop.
Attach Guy Lines and Tension
Attach guy lines to fly sheet, peg down, and apply tension.
How to Disassemble
Remove Pegs and Ropes
Pull pegs from ground and gather ropes.
Remove Vestibule Pole
Detach plastic hooks and remove vestibule pole from fly.
How to Disassemble
Remove Tent Poles
Remove plastic hooks and then poles from the inner tent.
Fold and Pack Tent Components
Fold fly, inner tent, and ground sheet, then pack into carry bag.
Quality Assurance
Repair Process
Details on requesting repairs, preparation, and cost coverage.
Need help?
Do you have a question about the FES-652 and is the answer not in the manual?
Questions and answers