Page 13
Instruction Manual Ver 1.00 FES-400 Kayard M Panel Cover Set...
Page 14
Thank you for purchasing a Snow Peak product. This product is a tarp used for camping. For safety, read the following instruction manual before use. Please keep it safe for future reference. Finally, if you find anything that you do not understand in the description or any problems with the product, please stop use immediately and contact the retailer or Snow Peak Customer Service.
Page 15
●Before using the product, check each part for abnormalities. If there are abnormalities, take the product to the dealer or Snow Peak Customer Service for inspection or repair. ●Pay close attention to the weather. If there are strong winds or extreme weather is in the forecast, pack up camp immediately and evacuate to a safe place.
Page 16
Name of the Parts Main corner Sub-corner Sub-corner Side panel Front panel B Peg-down rubber loop Peg-down Mud flap rubber loop Front panel A Peg-down rubber loop Item name tag Hook Front panel cover A Toggle Rubber loop Front panel cover B Item name tag Hook Toggle...
Page 17
Preparations Before Use Refer to the following diagram when securing the ropes and pegging the product down. Rope with tensioner Forked rope with tensioner Sub-corner Main corner 45° 45° 45° 45° Main corner Sub-corner Forked rope with tensioner Rope with tensioner The ideal pegging location is where the angle between the rope and the ground is approximately 45°...
Page 18
Setup Procedure Make sure to set up with two or more people in order to set up more safely. ① Spread the main unit in a half-folded state. Choose a flat, well-drained area with firm ground to pitch the tarp. Choose a place with no chance of avalanches, landslides, wind gusts, or sudden flooding.
Page 19
⑥ Peg the bottom part of a main corner. Peg the rubber loop at the bottom part of Making sure that the underside of a main corner. Peg the some tension is bottom part of the opposite side. applied to the ridge line.
Page 20
⑪ Peg down the rubber loops under the zipper of the front panel A. (2 locations) They are hidden under the mud flap. Flip it up to peg down the rubber loops. *Use caution to prevent damage to the skirt when using a hammer on the pegs. ⑫...
Page 21
Making the Entrance/Exit Remove the rubber loops from the bottom part of the panel to roll it up before starting this task. Folding the Side Panel (Outward) Fasten the side Fold inside the bottom panel with the part of the side panel to top toggle.
Page 22
Disassembly Procedure (Make sure to disassemble with two or more people) ① As a basic rule, to take the setup apart, perform the setup procedure in reverse order. *Remove all items from the main unit, including the panel covers and LED lanterns, making sure that there is noth- ing left inside before taking the setup apart.
Page 23
●Before using a product that has been in storage for a long time, check each part for abnormalities. If there are abnormalities, take the product to the retailer or contact Snow Peak Customer Service for inspection or repair. ●A combination of polyester materials is used in this product. In designing this product, we took the material characteristics into consideration and adopted processing and color patterns that will result in less color migration.
Page 24
Peak Customer Service. If there are apparent defects in the product's manufacturing, the defective product will be repaired or exchanged free of charge. In other cases, Snow Peak will repair the product for an appropriate fee. The decision to repair or replace the product will be at our discretion. Snow Peak will not repair the product for any damage that occurred due to the following 1.
Need help?
Do you have a question about the Kayard M Panel Cover Set and is the answer not in the manual?
Questions and answers