Regency CV50E Series Manual

City Series CV50E Direct Vent Gas Fireplace
MODEL
Fuel Type
Minimum Supply Pressure
Manifold Pressure - High
Manifold Pressure - Low
Orifice Size -Altitude 0-4500 ft
Minimum Input
Altitude 0-4500 ft. (0-1372m)
Maximum Input
Altitude 0-4500 ft. (0-1372m)
Vent Sizing
CSA P.4.1.
NOTE: This model comes with a 5" inner and 8" outer collar (127 mm x 203 mm) which must be reduced to 4" inner x 6-5/8" outer
(102 mm x 168 mm) in all applications when used as a power vent system. See power vent manual for details.
Dimensions
DIMENSIONS
PAGE 7
Note: Height Dimension is taken with leveling legs fully inserted and may vary depending on the height of the leveling legs, when unscrewed or extended.
Dimensions will appear as (inches)" / (metric) mm throughout this manual. The inches are rounded to the nearest 1/16" when converted, when greater
accuracy is required, use the metric dimensions.
Note: These units are non-load bearing.
ALL PICTURES / DIAGRAMS SHOWN THROUGHOUT THIS MANUAL ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCT MAY
VARY DUE TO PRODUCT ENHANCEMENTS.
CV50E-NG CV50E-LP
Natural Gas
5" W.C. (1.25 kPa) 11" W.C. (2.73 kPa)
3.8" W.C. (0.94 kPa) 10.5" W.C. (2.62 kPa)
1.1" W.C. (0.27 kPa) 2.9" W.C. (0.72 kPa)
# 36 DMS # 52 DMS
19,000 Btu/h 17,000 Btu/h
(5.56 kW) (4.98 kW)
35,000 Btu/h 33,000 Btu/h
(10.25 kW) (9.66 kW)
5" Inner / 8" Outer 5" Inner / 8" Outer
57.49%
7
45 "
8
1165mm
5"
127mm
8"
203mm
3
49 "
16
1249mm
3
54 "
8
1382mm
Propane
60.55%
1
8 "
2
216mm
City Series CV50E Direct Vent Gas Fireplace |
15
20 "
16
532mm
20-7/16''
(519 mm)
1