Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hikmicro Thunder Pro TQ35
Summarization of Contents
Chapter 1 Overview
1.1 Device Description
Provides details about the thermal image scope's features and design.
1.2 Main Function
Outlines the primary capabilities of the thermal image scope.
1.3 Appearance
Describes the physical characteristics and external components of the device.
1.3.1 Button
Details the function of each physical button on the device.
1.3.2 Interface
Illustrates and explains the various connection ports and physical interfaces of the device.
Chapter 2 Preparation
2.1 Cable Connection
Guides on connecting the device using various cables for power or data transfer.
2.2 Install Battery
Instructions for properly inserting the battery into the device compartment.
2.2.1 Select Battery Type
Explains how to select the correct battery voltage setting in the device menu.
2.3 Install Rail
Instructions on how to attach the device to a rail securely.
2.4 Change Eyepiece
Details how to swap the eyepiece for different usage modes.
2.5 Power On/Off
Covers the procedures for powering the device on, off, and setting auto power off.
2.6 Menu Description
Explains how to navigate and use the device's on-screen menu interface.
Chapter 3 Image Settings
3.1 Adjust Diopter
Guides on adjusting the diopter for clear viewing through the eyepiece.
3.2 Adjust Focus
Instructions for adjusting the focus ring to achieve a sharp image.
3.3 Adjust Brightness
Explains how to modify the display brightness for optimal visibility.
3.4 Adjust Contrast
Details how to adjust the image contrast for better detail.
3.5 Select Scene
Guides on selecting scene modes to enhance display effects based on environment.
3.6 Set Palettes
Explains how to choose different color palettes for image display.
3.7 Correct Defective Pixel
Instructions on how to identify and correct defective pixels on the screen.
3.8 Flat Field Correction
Describes the process of correcting display non-uniformity.
3.9 Set Picture in Picture Mode
Guides on activating and using the Picture in Picture display mode.
3.10 Adjust Digital Zoom
Explains how to use the digital zoom function to magnify the image.
3.11 Set OSD
Instructions for displaying or hiding On-Screen Display information.
3.11.1 Synchronize Time
Guides on setting and synchronizing the device's time.
3.12 Set Brand Logo
Explains how to add a brand logo to the device interface.
Chapter 6 Aiming Point Settings
6.1 Correct Reticle
Guides on enabling and adjusting the reticle for accurate aiming.
6.2 Set Reticle Color
Details how to change the color of the reticle for better visibility.
Chapter 8 Picture and Video
8.1 Capture Picture
Instructions on how to take still images with the device.
8.2 Record Video
Guides on how to start and stop video recording.
8.3 Export Files
Explains how to transfer captured pictures and videos to a PC.
Chapter 13 Maintenance
13.1 View Device Information
Guides on how to check the device's version and serial number.
13.2 Upgrade Device
Instructions for updating the device's firmware.
13.3 Restore Device
Steps to reset the device to its factory default settings.
Chapter 14 Frequently Asked Questions
14.1 Why is the monitor off?
Addresses issues related to the monitor not turning on.
14.2 The image is not clear, how to adjust it?
Provides solutions for unclear image display.
14.3 Capturing or recording fails. What's the problem?
Troubleshooting steps for capture and recording issues.
14.4 Why the PC cannot identify the device?
Solutions for problems where the PC does not recognize the device.
Chapter 15 Appendix
15.1 Device Command
Information on common serial port commands for the device.
15.2 Device Communication Matrix
Details on the device's communication ports and matrix.
Need help?
Do you have a question about the Thunder Pro TQ35 and is the answer not in the manual?
Questions and answers