Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Harman Martin JEM ZR45
Summarization of Contents
Dimensions and Legal Information
ZR25 Model Dimensions
Dimensions and specifications for the ZR25 model.
ZR35 Model Dimensions
Dimensions and specifications for the ZR35 model.
Dimensions and Legal Information
ZR45 Model Dimensions
Dimensions and specifications for the ZR45 model.
Safety Information
Preventing Electric Shocks
Precautions to avoid electrical hazards and ensure safe operation.
Preventing Burns and Fire
Safety measures to prevent burns and fires during operation.
Preventing Injuries
Guidelines to prevent physical injuries during installation and operation.
Preventing Breathing Problems
Risks and precautions related to fog output and respiratory health.
Product Overview
Product Description
General description of the JEM ZR series fog machines.
Features at a Glance
Summary of key features and capabilities of the JEM ZR series.
Product Details
ZR25 Model Details
Visual identification and key components of the ZR25 model.
Product Details
ZR35 Model Details
Visual identification and key components of the ZR35 model.
Product Details
ZR45 Model Details
Visual identification and key components of the ZR45 model.
Quick Start
Setting Up the Machine
Initial steps for positioning, filling, and connecting the fog machine.
Making Fog
Basic procedure for operating the machine to produce fog.
Installation and Setting Up
Location and Mounting
Guidance on choosing a safe location and mounting options.
AC Power Connection
Requirements and procedures for connecting the machine to AC power.
Installation and Setting Up
Pre-Operation Checks
Final checks before powering on the machine for safe operation.
Turning On the Power
Step-by-step guide to powering on the JEM ZR series machine.
Control Settings
Remote Control Overview
Explanation of the integrated digital remote control interface and functions.
Setting Run Modes
How to select operational modes like OFF, STANDBY, TIMER, or CONTINUOUS.
Setting Fog Output Density
Adjusting the fog output level from 0% to 100%.
Control Settings
Timer Function Setup
Configuring timed fog output intervals and off times.
Using the Settings Menu
Navigating through the machine's settings menu.
DMX Start Address Configuration
Setting the DMX address for controlling the machine.
Display Backlight Adjustment
Changing the brightness of the machine's display backlight.
Control Settings
Host-Client Link Mode
Setting up machines to communicate in a host-client configuration.
Priming After Fluid Out
Procedure to prime the machine after it runs out of fluid.
Factory Reset Procedure
Restoring machine settings to their original factory defaults.
DMX Control
DMX Overview
Introduction to DMX protocol for controlling the machine.
DMX Connection
How to connect the machine to a DMX controller.
DMX Functions
Explanation of DMX channels and their functions for fog output.
DMX Control
Setting Options via RDM
Remotely configuring machine settings using RDM.
DMX Control
RDM Functions List
Supported RDM functions for device management and status.
Approved Fog Fluid Types
RUSH & THRILL Fog Fluid
Details on RUSH & THRILL fog fluid for various applications.
JEM Pro-Fog Fluid, Extra Quick Dissipating
JEM Pro-Fog fluid for simulating steam/CO2 effects, for ZR45 only.
Approved Fog Fluid Types
JEM Pro-Fog Fluid, Quick Dissipating
JEM Pro-Fog fluid for fast dissipating fog in studio/theatre.
JEM Pro-Fog Fluid
Standard JEM Pro-Fog fluid for general use, clubs, theatres.
JEM Pro-Fog Fluid, High Density
JEM Pro-Fog fluid for long-lasting fog effects, scenic obscuring.
ZR45 Temperature Menu
Temperature settings required for specific fluid types on ZR45.
Basic Service
Cleaning Procedures
Steps for cleaning dust, fog fluid residue, and the exterior.
Martin Pro-Clean and Storage Fluid
Information on using Martin Pro-Clean fluid for maintenance.
Basic Service
Storage Procedure
Steps to follow after cleaning to prepare for storage.
Fuse Replacement
Instructions for replacing main and internal fuses on the machine.
Technical Specifications
Physical Specifications
Dimensions, weight, and physical characteristics of each model.
Performance Metrics
Data on ready time, coverage, and fluid consumption.
Control and Programming Options
Overview of control methods and parameters.
Technical Specifications
Construction Details
Details on housing, heat exchangers, pumps, and reservoirs.
Electrical Specifications
AC power requirements, fuses, and typical power/current draw.
Thermal Specifications
Ambient temperature limits and nozzle temperatures.
Approvals
Included Items
List of components included with the JEM ZR series machines.
Accessories
Optional accessories available for the JEM ZR series.
Technical Specifications
Service Tools
Specialized tools for servicing the JEM ZR machines.
Ordering Information
Part numbers and ordering details for models and accessories.
Need help?
Do you have a question about the Martin JEM ZR45 and is the answer not in the manual?
Questions and answers