Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Harman Martin JEM ZR35
Summarization of Contents
Safety Information
Preventing Electric Shocks
Guidance on avoiding electrical hazards, including grounding and power source checks.
Preventing Burns and Fire
Precautions related to hot surfaces, fog output, and flammable materials.
Preventing Injuries
Instructions for secure mounting, rigging, and fall prevention during installation.
Preventing Breathing Problems
Advice on safe fog usage, ventilation, and avoiding exposure for sensitive individuals.
Product Overview
Product Description
Overview of JEM ZR series flexibility, remote control, and DMX capabilities.
Features at a Glance
Key features of the JEM ZR series, including design, control, and output options.
Quick Start
Setting Up
Initial steps for locating, filling, and connecting the fog machine to power.
Making Fog
Instructions on how to operate the machine to produce fog and adjust output.
Installation and Setting Up
Location
Guidelines for placing and suspending the machine, including clearance requirements.
AC Power
Details on correct power plug rating and wiring for safe electrical connection.
Setting Up
Fluid filling and DMX/link mode connection steps before powering on.
Final Checks
Pre-power checks for safe location, operator knowledge, fluid, grounding, and power circuits.
Turning On the Power
Procedure for switching on the machine and understanding the display indications.
Control Settings
Overview
Introduction to the Integrated Digital Remote Control for configuring machine settings.
Setting Run Modes
How to select operational modes like OFF, STANDBY, TIMER, or CONTINUOUS.
Setting Fog Output Density
Adjusting the fog output level from 0% to 100% via the control panel.
Setting the Timer
Configuring automatic on/off intervals for fog output cycling.
Using the Settings Menu
Accessing advanced settings like DMX address, brightness, and reset options.
Setting the DMX Start Address
Procedure for assigning a DMX start address to control the machine.
Display Backlight Setting
Adjusting the brightness level of the machine's digital display.
Setting the Host-Client Link Mode
Configuring machines for master/slave operation using DMX cabling.
Priming the Machine After Fluid Out
Steps to prime the machine after it has run out of fluid and been refilled.
Resetting Options to Factory Settings
Restoring all machine settings to their original factory defaults.
DMX Control
Overview
Introduction to DMX protocol for controlling the machine remotely.
Connection
How to connect the machine to a DMX controller using XLR cables.
DMX Functions
Details on DMX channels, personalities, and control values for fog output and functions.
Setting Options by RDM
Remote configuration of the fixture using RDM commands for discovery and parameter control.
RDM Functions
List of supported RDM functions for device management and status monitoring.
Approved Fog Fluid Types
ZR45 Temperature Menu
Selecting temperature settings for specific fluid types on the ZR45 model.
Basic Service
Cleaning
Instructions for cleaning dust, fluid residue, and maintaining air vents for optimal performance.
Martin Pro-Clean and Storage Fluid
Information on using specialized fluid for cleaning and preventative maintenance.
Storage Procedure
Steps for storing the machine after cleaning to prevent leaks and seepage.
Fuse Replacement
Procedure for identifying and replacing fuses, including safety warnings.
Technical Specifications
Approvals
List of certifications and compliance standards met by the JEM ZR series.
Accessories
Optional accessories available for the JEM ZR series, such as ducting kits.
Service Tools
Specialized tools recommended for servicing and calibration of the JEM ZR series.
Ordering Information
Part numbers and ordering details for different models and configurations.
Need help?
Do you have a question about the Martin JEM ZR35 and is the answer not in the manual?
Questions and answers