BESAFE IZI COMFORT ISOFIX User Manual page 5

Forward-facing belt installation
It is NOT ALLOWED to mount the seat in a front
!
passenger seat WITH AN ACTIVATED AIRBAG.
1-
When mounting in the back seat of the vehicle, push the front
seat of the vehicle forward as much as possible.
When mounting in the front seat of the vehicle, adjust the back
rest in an upright position.
2- Put the child seat on the seat of the
vehicle. Unlock the belt clamps (10).
3-
Release the release handle at the
back of the head rest and push the
head rest down while keeping the
head rest upright (11).
4-
Pull the hip belt around the bottom
base of the seat and click the car belt
in the buckle (12).
8
(10)
(11)
(12)
5-
Put the shoulder belt through the
belt clamps. Make sure the belt is
not twisted (13).
6- Push the seat firmly into the car
seat.
7-
Tight installation is most important
for forward facing seats.
Tension the belts as follows:
Pull the shoulder belt upwards (A).
Have a firm grip on the shoulder
belt in the seat area (B). Close the
clamp on the inner side (C).
Pull upper belt part on the door
side and close clamp D (13).
8- Push the belt tensioner in the
arrow direction to tension the
3-point car belt (14).
9- Make sure the 3-point car belt is as tight as possible.
Repeat the procedure if the car belt is not tight.
10-
Push the head rest in the correct
position (refer to 'Positioning of the
child' on page 11). Push the floor
support fully down. Make sure the
floor support is in contact with the
floor of the car. The seat is now
ready to use (15).
D
C
B
A
(13)
(14)
(15)
9