Eyelet Stitch - Pfaff SMART 200C Owner's Manual

EYELET STITCH

Select stitch 28 for sewing eyelets on belts, etc
1. Select pattern 28 to get the eyelet stitch.
Attach satin stitch foot (A).
2. Press the "-" or "+" stitch width adjustment
to select the eyelet size.
Size of eyelet:
A. Large: 7.0mm (1/4 inch).
B. Medium: 6.0mm (15/64 inch).
C. Small: 5.0mm (3/16 inch).
3. Lower the needle into the fabric at the
beginning of the stitching, and then lower
the presser foot lever.
Once sewing is completed, the machine
automatically sews reinforcement stitches,
then stops.
4. Make a hole at the center using an eyelet
punch.
Eyelet punch is not included with the
machine.
Please Note: If thin thread is used, the
stitching may not be dense enough. If
this occurs, sew the eyelet twice one
on top of the other.
45