Pfaff SMART 200C Owner's Manual page 41

3. Select the buttonhole stitch. Adjust the
stitch width and the stitch length to the
desired width and density.
Starting
point
4. Position the fabric under the presser foot
so that the buttonhole mark is aligned with
the center of the buttonhole foot.
Pull down the buttonhole lever, then push
it to the back.
5. Start sewing while lightly holding the end
of the upper thread.
Please Note: When you select any
buttonhole pattern the LCD screen will
display the fi gure "
to lower the buttonhole lever.
Please Note: The machine will
automatically sew a reinforcement stitch
after the buttonhole is sewn.
" to remind you
41