Zipper Insertion - Pfaff SMART 200C Owner's Manual

ZIPPER INSERTION

Inserting a centered zipper
48
Attention: Zipper foot should be used
for sewing width center needle position
straight stitch only. It is possible that
needle could hit the presser foot and
break when sewing other patterns.
1. Baste the zipper opening on the garment.
2. Press open the seam allowance. Place the
zipper face down on the seam allowance
with the teeth against the seam line. Baste
the zipper tape.
3. Attach the zipper foot. Attach the right side
of the presser foot pin to the holder when
sewing the left side of the zipper.
4. Attach the left side of the presser foot pin
to the presser foot holder when sewing the
right side of the zipper.
5. Stitch left side of the zipper from bottom to
top.
6. Stitch across the lower end and right side
of zipper. Remove the basting and press.