Timer Recording - Sangean PR-D8 Manual

Hide thumbs Also See for PR-D8:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Timer Recording

The PR-D8 is capable of recording selected audio program into an
SD card on an MP3 format at selectable recording on and off time.
1. Press power button to turn the radio on.
2. Make sure the real time is set before setting timer recording.
3. Press and release TIMER REC button, will display previous timer
recording time.
4. Press and hold TIMER REC button until TIMER REC ON
appears on the display and flashes hour digit.
5. Press tuning up or down button to select the required timer
recording on the hour then press TIMER REC button again and
follow same procedure to set the minute.
6. Press TIMER REC button again to complete TIMER REC
on time. The display will flash TIMER REC OFF.
7. Pressing tuning up or down button to select Timer REC
OFF time. Press TIMER REC button to complete timer recording
time setting.
8. Switch the Timer Recording button which is located on your right
hand side beneath volume control to ON position. The display will
show TIMER REC indicating timer recording is set.
9. Press band button to select MW or FM or SD (microphone) or
AUX IN band. Press tuning up/down or preset buttons to select
your favorite radio station for recording. When you select record
from Aux In band, make sure the audio device (MP3 player or
CD walkman) is plugged into Aux In jack and turn on the device.
If you select timer recording from built-in microphone, press the
band button to select SD.
17

Advertisement

Table of Contents
loading

Table of Contents