Snooze Function; Sleep Function; Display Backlight - Sangean PR-D8 Manual

Snooze Function

1. While the alarm is active, press any buttons except the power
button to activate the snooze function. The radio or HWS buzzer
alarm will be silenced with interval of 5 minutes.
2. The display will flash both the snooze symbol
alarm symbol. The snooze function can be repeated during the
one hour that the alarms are active.

Sleep Function

The sleep timer will automatically turn the radio off after a preset
time has elapsed.
1. Press and continue to hold down the power button for more than
2 seconds, followed by a beep, the display will cycle through the
available sleep timers in the order of 60-45-30-15-120-90-60.
Release the power button when the required sleep timer
appears in the display. The
and the radio will play the last station selected.
2. To cancel the sleep function, simply press the power button.
The symbol will disappear and radio will shut off.

Display Backlight

Press any buttons and the LCD display will illuminate for
approximately 7 seconds. During scanning the station and the alarm
is activated it will also automatically illuminate the display.
Another option is you can also set LCD brightness by pressing and
releasing the
13
button to select bright, brighter, brightest and off.
and the
symbol will appear in the display