Related Manuals for Shimano SW-EN600-R
Summarization of Contents
Installation/removal
SHIMANO STEPS battery management systems and compatibility
Explains compatibility between different generations of SHIMANO STEPS battery systems.
Electric wires
Details the types of electric wires used and their specifications.
Installing the cycle computer
Provides step-by-step instructions for mounting the cycle computer.
Installing the switch unit
Guides the installation of various switch units onto the handlebars.
Wiring around the cockpit (clamp band type cycle computer)
Illustrates the wiring process for clamp band type cycle computers.
Wiring around the cockpit (switch unit integrated type cycle computer)
Explains wiring for integrated switch unit cycle computers.
Wiring around the cockpit (bracket installation type cycle computer)
Details wiring for bracket mounted cycle computers.
Wiring around the cockpit (other cases)
Covers wiring configurations without a cycle computer.
Connection and communication with devices
Introduction
Overviews system connection and firmware update procedures.
Connection with all SHIMANO STEPS components
Describes connecting all system components to a PC for management.
Single component connection
Explains how to connect individual components to a PC.
Drive unit setting backup function
Details backing up drive unit settings via the cycle computer.
Maintenance alert
Explains the system's notification of upcoming maintenance needs.
Maintenance
Replacing the clamp band
Instructions for replacing the clamp band on cycle computers.
Gear shifting adjustment with the electronic gear shifting unit [Adjust]
Guides on adjusting electronic gear shifting using the cycle computer.
Time settings
Information on the system's internal time and its usage.
Need help?
Do you have a question about the SW-EN600-R and is the answer not in the manual?
Questions and answers