Related Manuals for KUHN EL92-205
Summarization of Contents
3. Identification of the Machine
3.1 Front View Identification
Identifies machine components from the front view.
3.2 Rear View Identification
Identifies machine components from the rear view.
3.3 Model Identification Plate
Details information on the machine's identification plate for ordering parts.
3.4 Optional Equipment Overview
Lists and describes optional equipment available for the machine.
4. Safety
Description of Safety Symbols
Explains warning symbols used in the manual for hazard communication.
General Safety Instructions
Outlines essential safety principles for operating and maintaining the machine.
Operational Safety Precautions
Details safety measures for machine setup, operation, and use.
Safety During Transport and Road Use
Covers safety requirements and precautions when transporting the machine on public roads.
Safety Decals and Their Meaning
Identifies the location and explains the meaning of safety warning decals on the machine.
Road Safety Equipment
Describes required safety equipment for road transport and usage.
5. Machine Specifications
Machine Description and Glossary
Provides an overview and defines key components and terms of the machine.
Designated Use of the Machine
Specifies the intended applications and tasks for which the machine is designed.
Technical Specifications Overview
Lists key technical data, dimensions, and power requirements for different models.
Required Equipment for Operation
Details essential components and specifications needed for the machine's use.
Sound Level Measurements
Presents measured sound pressure levels for the tractor and tractor-machine combination.
6. Putting Into Service
Coupling and Uncoupling Procedures
Details the steps for connecting and disconnecting the machine from the tractor.
Tractor Preparation for Operation
Outlines necessary checks and adjustments to the tractor before attaching the machine.
Machine Preparation for Work
Covers setting up the machine for axial or offset working positions and linkage adjustments.
Primary PTO Shaft Installation
Explains proper installation and adjustment of the PTO shaft for safe power transmission.
Friction Slip Clutch Adjustment
Describes how to check and adjust the friction slip clutch for optimal performance and protection.
7. Instructions for Transport
Positioning for Transport
Details how to adjust the machine for safe transport position.
Compliance with Road Regulations
Outlines requirements for legal and safe transport of the machine on public roads.
8. Instructions for Work
Putting the Machine into Work Position
Steps to transition the machine from transport to working configuration.
Adjustments for Working Position
Details adjustments for working depth, hood, and rotor speed for optimal performance.
Working Depth Adjustment Guide
Explains how to set the working depth using various depth control systems.
Rear Hood Adjustment
Describes how to adjust the rear hood for different soil tilth results.
Rotor Speed Adjustment Methods
Explains how to change rotor speed by adjusting gearwheels for different soil conditions.
General Machine Use Guidelines
Provides essential advice and precautions for operating the machine safely and effectively.
9. Optional Equipment
Side Discs and Depth Adjustment
Describes the function and adjustment of side discs for improved soil flow and stability.
Track Eradicators with Flexible Tines
Details fitting, coupling, adjustments, and maintenance for track eradicators.
Gearwheel Sets for Rotor Speed Adjustment
Explains the use of gearwheel sets to achieve different rotor speeds.
Lighting and Signalling Systems
Covers installation and connection of lighting and signalling for road safety.
Specialized Signalling Equipment
Details specific signalling equipment for France and the USA.
Roller Arm and Rotor Clamps
Describes the roller arm and rotor clamp accessories.
10. Maintenance and Storage
Maintenance Schedule and Frequency
Provides a chart outlining maintenance tasks and their recommended intervals.
Cleaning and Lubrication Procedures
Details how to clean the machine and where to lubricate components.
Gearbox Oil Servicing
Covers draining, filling, and checking oil levels for the central and side gearboxes.
PTO Shaft and Roller Bearing Maintenance
Outlines lubrication for PTO shafts and greasing for roller bearings.
Tool and Blade Replacement
Instructions on how to replace worn tools and blades, including blade mounting.
Seasonal Storage Guidelines
Recommendations for preparing and storing the machine at the end and start of seasons.
Machine Dismantling and Scrapping
Procedures for safely dismantling and disposing of the machine at the end of its life.
11. Troubleshooting Guide
Drive Noise Issues
Addresses causes and solutions for noisy drive during lifting and operation.
Excessive Power Consumption
Explains reasons for high power draw and how to resolve them.
Ground Projection Problems
Troubleshooting for issues related to ground projections during operation.
Tilth Quality Issues
Solutions for achieving proper soil tilth and residue mixing.
Ridging and Uneven Work
Addresses causes and remedies for ridging across the work path.
12. Appendix
Calculating Axle Load and Ballast
Provides methods and formulas for calculating axle loads and required ballast.
13. Limited Warranty
Warranty Coverage and Exclusions
Outlines what is covered by the warranty and common exclusions.
Customer Responsibilities and Conditions
Details customer obligations and conditions for warranty claims.
Need help?
Do you have a question about the EL92-205 and is the answer not in the manual?
Questions and answers