Related Manuals for Sungrow SH8 0RT Series
Summarization of Contents
Understanding This Manual
Manual Validity
Specifies the inverter models for which this manual is applicable.
Target Audience and Requirements
Identifies the intended users and their necessary qualifications.
How to Use This Manual
Provides guidance on how to effectively read and utilize the manual.
Safety Symbols and Warning Alerts
Danger Alerts
Highlights high-risk hazards that can lead to death or serious injury.
Warning Alerts
Indicates moderate-risk hazards that can lead to death or serious injury.
Caution Alerts
Points out low-risk hazards that can lead to minor or moderate injury.
Notice Alerts
Warns of potential risks leading to device malfunctions or financial losses.
Safety Instructions
Unpacking and Initial Inspection
Steps for carefully unpacking and inspecting the product for damage.
Installation Safety
Ensures safe practices are followed during the physical installation process.
Electrical Connection Safety
Outlines critical safety measures for all electrical connections.
Operation Safety
Specifies safety rules to be followed while the product is running.
Maintenance Safety
Details safety precautions required before and during maintenance tasks.
Disposal Safety
Provides instructions on safely and legally disposing of the product.
Product Description
System Overview
Provides a general introduction to the hybrid inverter system's capabilities.
Product Overview and Appearance
Describes the product's model naming convention and visual appearance.
Product Symbols and Explanations
Details the meaning and purpose of various symbols found on the product.
LED Indicator Status and Meaning
Explains the function and states of the LED indicator on the inverter.
DC Switch Functionality
Describes the purpose and operation of the DC switch.
PV Energy Storage System (PV ESS)
Introduces the PV ESS and its ability to provide backup power.
Parallel System Configuration
Details how multiple inverters can be connected in parallel to the grid.
PV Storage and EV Charging System
Describes the integrated system for PV storage and electric vehicle charging.
Retrofitting Existing PV Systems
Guidance on upgrading existing PV systems with hybrid inverters.
Retrofitted PV Storage and EV Charging System
Details the configuration of a retrofitted PV storage and EV-charging system.
Inverter Functionality
Inverter Safety Features
Details integrated protective functions for system safety.
Earth Fault Alarm Function
Explains the earth fault alarm mechanism and signaling.
Energy Conversion and Management
Covers how the inverter converts DC to AC and manages energy flow.
Power Derating Mechanism
Explains power derating for overload protection and grid requirements.
Demand Response Modes (DRM)
Details the supported Demand Response Modes (DRMs) for grid interaction.
Operational Voltage Range
Specifies the allowable voltage range for normal inverter operation.
Operational Frequency Range
Defines the acceptable grid frequency range for inverter operation.
Reactive Power Regulation
Explains how the inverter supports grid stability through reactive power control.
Load Control Functionality
Describes the load control capabilities using dry-contact relays.
Battery Management
Covers compatible batteries and their management by the inverter.
Battery Charge Management
Details how the inverter manages battery charging processes.
Battery Discharge Management
Explains how the inverter manages battery discharge to prevent deep discharge.
Communication and Configuration
Describes the communication ports and system configuration methods.
Unpacking and Storage
Unpacking and Initial Inspection
Steps for carefully unpacking and inspecting the product for damage.
Scope of Delivery
Lists all items included in the product package.
Inverter Storage
Provides instructions for proper storage of the inverter before installation.
Mechanical Mounting
Mounting Safety
Highlights safety measures to be taken during the mounting process.
Mounting Location Requirements
Specifies environmental and physical requirements for installation sites.
Environment Requirements for Mounting
Details the environmental conditions necessary for safe and effective installation.
Mounting Structure Requirements
Specifies the requirements for the structure supporting the inverter.
Mounting Angle Requirements
Defines the correct orientation and angles for inverter installation.
Clearance Requirements for Heat Dissipation
Specifies the necessary space around the inverter for proper ventilation.
Installation Tools List
Lists the tools required for the installation process.
Moving the Inverter Safely
Provides instructions for safely moving the inverter to the installation site.
Installing the Inverter
Details the process of physically mounting the inverter onto the wall.
Electrical Connection
Electrical Connection Safety
Critical safety guidelines to prevent electric shock and equipment damage.
Terminal Description
Identifies and describes the various terminals on the bottom of the inverter.
Electrical Connection Overview
Presents a system wiring diagram and overview of electrical connections.
External Protective Grounding
Details the procedure and requirements for connecting the protective ground.
Protective Grounding Requirements
Specifies the standards and cross-sectional areas for grounding cables.
Grounding Connection Procedure
Step-by-step instructions for performing the protective grounding connection.
AC Cable Connection
Outlines necessary conditions and permissions for grid connection.
AC Circuit Breaker
Recommends specifications for the AC circuit breaker installation.
Residual Current Monitoring
Explains the integrated and external residual current monitoring functions.
Assembling the AC Connector
Provides a step-by-step guide to assembling the AC connector.
Installing the AC Connector
Details the process of connecting the assembled AC connector to the inverter.
DC Cable Connection
Provides instructions for connecting the DC cables from the PV strings.
PV Input Configuration
Specifies DC power limits and configuration for PV strings.
Assembling the PV Connectors
Details the process of assembling the PV connectors for DC connection.
Installing the PV Connector
Provides instructions for connecting the assembled PV connectors to the inverter.
Communication Connection
Details how to connect the inverter using an Ethernet network cable.
WiNet-S Connection
Explains how to connect the WiNet-S module for WLAN and Ethernet communication.
RS485 Connection
Details the RS485 connection for communication with external devices.
Assembling the COM Connector
Provides instructions for assembling the COM connector for communication.
Installing the COM Connector
Details connecting the COM connector for DI/DRM to the inverter.
Smart Energy Meter Connection
Explains how to connect the Smart Energy Meter for power monitoring.
Battery Connection
Provides guidance on connecting the battery to the inverter.
Connecting Battery Power Cables
Details how to connect the power cables for the battery module.
SUNCLIX Connector Assembly
Steps for assembling the SUNCLIX connector for battery power cables.
Installing the SUNCLIX Connector
Explains how to install the SUNCLIX connector onto the battery terminals.
Evo2 Compatible Connector Assembly
Details the assembly process for Evo2 compatible connectors.
Installing the Evo2 Compatible Connector
Provides instructions for installing the Evo2 compatible connector.
CAN Cable Connection for Battery Communication
Explains how to connect the CAN cable for battery communication.
Enable Cable Connection for LG Chem Battery
Details the connection of the Enable cable for LG Chem battery communication.
EV-Charger Communication Setup
Explains how the inverter communicates with the EV charger.
Digital Output (DO) Connection
Describes the connection and functions of the Digital Output (DO) relay.
Digital Input (DI) Connection for DRM
Explains Digital Input (DI) connections for Demand Response Modes (DRM).
COM Connector Assembly for DI/DRM
Steps to assemble the COM connector for DI/DRM connections.
Installing the COM Connector
Details connecting the COM connector for DI/DRM to the inverter.
Backup Connection
Explains how to connect the backup power terminals.
Commissioning
Inspection Before Commissioning
Lists essential checks to perform before starting the commissioning process.
Commissioning Procedure
Step-by-step guide for the initial startup and commissioning of the inverter.
App Preparation
Steps to prepare the mobile app for system configuration and monitoring.
Creating a Plant
Guides users through the process of setting up a new plant within the app.
iSolarCloud App
App Brief Introduction
Introduces the iSolarCloud App for monitoring and maintenance.
Installing the App
Provides methods for downloading and installing the iSolarCloud mobile application.
Account Registration
Details the process for registering a new user account on the platform.
Login
Explains the requirements and procedure for logging into the application.
Login Requirements
Lists the prerequisites for successfully logging into the iSolarCloud app.
Login Procedure
Step-by-step guide for logging into the iSolarCloud application.
Initial Settings
Guides through initial setup parameters like country and device initialization.
Feed-in Limitation
Configures the maximum power that can be exported to the grid.
Backup Mode
Sets the reserved battery SOC for off-grid operation during blackouts.
Reactive Power Regulation Mode
Details various modes for regulating reactive power to support the grid.
Q(P) Mode Operation
Explains reactive power control based on output power (Q(P) curve).
Q(U) Mode Operation
Explains reactive power control based on grid voltage (Q(U) curve).
App Function Overview
Provides a summary of the app's main features and navigation.
App Home Screen
Displays the main home screen of the iSolarCloud application.
Run Information
Shows real-time operating data and performance information of the inverter.
Records
Allows users to view historical data, charts, and fault records.
Chart Records
Displays power generation data in graphical and histogram formats.
Fault Alarm Record
Lists recorded faults and alarms with details and corrective actions.
Event Records
Provides a log of system events such as startup, standby, and operation.
Inverter (Optional)
Provides details specific to the inverter interface within the app.
EV-Charger (Optional)
Details the interface and features for the optional EV-Charger.
Driving Distance Per kWh
Allows setting the driving distance per kWh for EV charging.
Charging Mode
Explains the different charging modes available for the EV-Charger.
Parameter Setting
Guides on setting various parameters for the EV-Charger.
Start/Stop Switch
Details how to start and stop the EV-Charger operation.
More Features
Accesses advanced settings, firmware updates, and system information.
System Parameters
Allows configuration of core system parameters for the inverter.
Running Time
Configures the time parameters for inverter running and reconnection states.
Fault Recovery
Displays fault recovery records and related settings.
Regular Parameters
Allows configuration of general operational parameters, including DO control.
Off-grid Parameters
Configures specific parameters for off-grid operation modes.
Active Power Regulation
Configures settings for regulating the inverter's active power output.
Reactive Power Regulation
Configures settings for regulating the inverter's reactive power output.
Battery Discharge Time
Sets specific time periods for battery discharge operation.
Battery Forced Charge Time
Configures time periods for forced battery charging.
Load Control
Allows selection and configuration of load control modes (Timing, Switch, Intelligent).
Communication Parameters
Configures network and serial port parameters for communication.
Firmware Update
Guides on how to download and install firmware updates for the inverter.
Grounding Detection
Configures settings for ground fault detection and alarm.
Parallel Configuration
Sets up master/slave configurations for parallel inverter operation.
Frequency Shift Power Control
Configures frequency shift for power control during backup operation.
Energy Management Mode
Allows selection of different energy management modes (Self-Consumption, etc.).
MicroGrid System Parameters
Configures parameters specific to MicroGrid system operation.
DO Configuration
Sets up the control modes for Digital Output relays.
System Decommissioning
Disconnecting the Inverter
Outlines the safe procedure for disconnecting the inverter from power sources.
Dismantling the Inverter
Details the process for physically removing the inverter.
Disposal of the Inverter
Provides guidance on the environmentally responsible disposal of the inverter.
Decommissioning the Battery
Explains the steps for safely decommissioning and disconnecting the battery.
Troubleshooting and Maintenance
Troubleshooting
Provides solutions for common alarms and fault codes.
Maintenance
Details routine maintenance tasks and safety notices.
Maintenance Notices
Highlights critical safety and operational notices before performing maintenance.
Routine Maintenance
Outlines regular checks and maintenance tasks for the inverter.
Replacing the Button Cell
Provides instructions for replacing the button cell on the PCB.
Appendix
Technical Data
Presents comprehensive technical data for the inverter models.
Compatibility for Backup under Off-grid Scenario
Details appliance compatibility for backup power during off-grid operation.
Quality Assurance
Explains warranty terms, conditions, and exclusions.
Contact Information
Provides contact details for customer support and inquiries.
Need help?
Do you have a question about the SH8 0RT Series and is the answer not in the manual?
Questions and answers